ITExamDump는Nortel 920-159인증시험의 촉매제 같은 사이트입니다.Nortel 920-159인증시험 관연 덤프가 우리ITExamDump에서 출시되었습니다. 여러분이Nortel 920-159인증시험으로 나 자신과 자기만의 뛰어난 지식 면을 증명하고 싶으시다면 우리 ITExamDump의Nortel 920-159덤프자료가 많은 도움이 될 것입니다.
ITExamDump의 Nortel인증 920-159덤프의 무료샘플을 이미 체험해보셨죠? ITExamDump의 Nortel인증 920-159덤프에 단번에 신뢰가 생겨 남은 문제도 공부해보고 싶지 않나요? ITExamDump는 고객님들의 시험부담을 덜어드리기 위해 가벼운 가격으로 덤프를 제공해드립니다. ITExamDump의 Nortel인증 920-159로 시험패스하다 더욱 넓고 좋은곳으로 고고싱 하세요.
많은 사이트에서 Nortel인증 920-159시험대비덤프를 제공해드리는데ITExamDump를 최강 추천합니다. ITExamDump의Nortel인증 920-159덤프에는 실제시험문제의 기출문제와 예상문제가 수록되어있어 그 품질 하나 끝내줍니다.적중율 좋고 가격저렴한 고품질 덤프는ITExamDump에 있습니다.
ITExamDump의Nortel인증 920-159덤프공부가이드에는Nortel인증 920-159시험의 가장 최신 시험문제의 기출문제와 예상문제가 정리되어 있어Nortel인증 920-159시험을 패스하는데 좋은 동반자로 되어드립니다. Nortel인증 920-159시험에서 떨어지는 경우Nortel인증 920-159덤프비용전액 환불신청을 할수 있기에 보장성이 있습니다.시험적중율이 떨어지는 경우 덤프를 빌려 공부한 것과 같기에 부담없이 덤프를 구매하셔도 됩니다.
Nortel 920-159인증시험이 이토록 인기가 많으니 우리ITExamDump에서는 모든 힘을 다하여 여러분이 응시에 도움을 드리겠으며 또 일년무료 업뎃서비스를 제공하며, ITExamDump 선택으로 여러분은 자신의 꿈과 더 가까워질 수 있습니다. 희망찬 내일을 위하여 ITExamDump선택은 정답입니다. ITExamDump선택함으로 당신이 바로 진정한IT인사입니다.
Nortel인증 920-159시험은 인기있는 IT자격증을 취득하는데 필요한 국제적으로 인정받는 시험과목입니다. Nortel인증 920-159시험을 패스하려면 ITExamDump의Nortel인증 920-159덤프로 시험준비공부를 하는게 제일 좋은 방법입니다. ITExamDump덤프는 IT전문가들이 최선을 다해 연구해낸 멋진 작품입니다. Nortel인증 920-159덤프구매후 업데이트될시 업데이트버전을 무료서비스료 제공해드립니다.
ITExamDump 에서는 IT인증시험에 대비한 퍼펙트한Nortel 인증920-159덤프를 제공해드립니다. 시험공부할 시간이 충족하지 않은 분들은ITExamDump 에서 제공해드리는Nortel 인증920-159덤프로 시험준비를 하시면 자격증 취득이 쉬워집니다. 덤프를 구매하시면 일년무료 업데이트서비스도 받을수 있습니다.
시험 번호/코드: 920-159
시험 이름: Nortel (Ncss callpilot 2.x/3.0)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 140 문항
업데이트: 2014-03-27
920-159 덤프무료샘플다운로드하기: http://www.itexamdump.com/920-159.html
NO.1 You are installing a CallPilot 3.0 system with 32 Voice channels, 8 Fax channels, and 4
ASR (automated speech recognition) Cannels using a CallPilot 702t server and a Meridian
1 IP Enable (IE) Option 61C switch. How many NTRB18CA MGate cards must be
installed in the switch to support this configuration?
A. 1
B. 2
C. 3
D. 4
Answer: B
Nortel dumps 920-159 920-159
NO.2 .Exhibit
Prior to installing a CallPilot 3.0 system, you review, the Configuration Wizard worksheet.
The customer has provided category 5 cable connections to their corporate LAN for the
Switch Ethernet connection, the CallPilot Server Customer LAN (CLAN) Ethernet
connection, and the CallPilot Server Embedded LAN (ELAN) Ethernet connection. The
network address information (shown in the exhibit) for the Switch IP address, the CallPilot
server ELAN IP address, and the CallPilot Server CLAN IP address integrate with the
customer's internal network. What action would you take?
A. Proceed with the installation using the category 5 cable connections, IP addresses and Subnet
mask provided by the customer.
B. Proceed with the installation but do not use the category 5 cable connections provided by the
customer for the Switch Ethernet connection and the CallPilot server ELAN Ethernet
connection. Use a separate category 5 cable that connects directly from the switch to the ELAN
network interface connector on the server.
C. Inform the customer that IP address beginning with 192.168 are private address and if used
the ELAN will not be able to be connected to the internet.
D. Inform the customer that the ELAN must be on a separate IP network isolated from the
CLAN. Recommend that they use a dedicated hub that can either be supplied by Nortel Network
or a third party for the ELAN and recommend different IP addresses for switch and the ELAN
NIC.
Answer: D
Nortel dump 920-159덤프 920-159시험문제 920-159 dumps 920-159인증
NO.3 A site has a CallPilot 3.0 server. Which two administrative functions support the
web-based CallPilot Manager administrative application? (Choose two.)
A. Managing system configuration and backups
B. Creating application with Application Builder
C. Managing mailbox Users, groups, and permissions
D. Managing CallPilot Simple network Maintenance Protocol (SNMP) traps
Answer: A.C
NO.4 .When installing a 40-channel CallPilot 3.0 system using a 201i server and a CS 1000
system, how do you connect the SCSI connection to the server?
A. The SCSI connection to the 201i server is made with the low profiles right-angle SCIS
connector on the SCIS connector on the 201i server faceplate.
B. NTRH3502SCSI cable attached to the SCSI connection to the 201i server is made with the
CD-ROM drive SCSI cable NTRH1408 attached from the SCIS connector on the 201i server
faceplate to the SCSI adapter A0763912 on the CD-ROM drive
C. NTRH3502SCSI cable attached to the SCSI connection to the 201i server is made via the
backplane connector in the Media Gateway or Media Gateway Expansion with the multi I/O
cable (NTRH0912) to the next drive in the SCIS chain.
D. NTRH3502SCSI cable attached to the SCSI connection to the 201i server is madewith the
intermediate SCIS cable NTRH1408 that connect from the SCIS connector on the 201i server
faceplate to the I/O panel connector and the NTRH410 SCSIcable that connect from the I/O
panel connector to the next device in the SCSI chain.
Answer: A
Nortel 920-159 dumps 920-159덤프 920-159 pdf 920-159
NO.5 A site has a CallPilot server interworking with a Symposium server. Where are the
applications (announcement service, menus, etc.) stored to support Symposium to CallPilot
integration?
A. in a folder
B. in a mailbox
C. on the C drive
D. by a backup file
Answer: A
Nortel 920-159최신덤프 920-159 920-159
NO.6 .XXXX .com has a CallPilot 3.0 configuration connected to a Meridian 1. the CallPilot
platform connect to the network loops in the IPE shelf through MGate cards. The MGate
cards plug into the Meridian 1 IPE shelf. Which three platform types connect using the
Mgate card? (Choose three.0?
A. 200i
B. 201i
C. 702t
D. 1001ro
E. 1002rp
Answer: A.B.C
NO.7 When installing a 40-channel 3.0 system using a 201i server and a Meridian 1 Option 11C
mini switch, how should you set the SCSI ID on the Tandberg SLR5 tape drive
(NTRH9038)?
A. Rotate the dial on the SCIS ID rotary switch unit the arrow points to 3.
B. Use the blade of a screwdriver to press either the plus (+) or minus (? Button the SCSI ID
switch to set the SCIS ID to 5.
C. Use the blade of a screwdriver to set DIP switches as follows.
1=ON, 2=off, 3=Off, 4=Off, 5=Off
D. The SCSI ID for the Tandberg SLR5 tape drive (NTRH9038) is set when you run the
Configuration Wizard after you install the CallPilot system.
Answer: B
Nortel시험문제 920-159 920-159 920-159덤프
NO.8 When installing a 96-chabbel 3.0 system using a 1003rp server and a CS 1000 system, how
would you install the Nortel Network software feature key adapter?
A. The Nortel Networks software feature Key adapter is installed in its bracket on the
motherboard in the 102rp server.
B. The Nortel Networks software feature Key adapter is installed in the COM1 serial port
connector on the rear of the 1002rp server.
C. The Nortel Networks software feature Key adapter is installed in the COM1 serial port
connector on the rear of the 1002rp server.
D. The Nortel Networks software feature Key adapter is installed in the Parallel port connector
LPT1 on the rear of the 1002rp server.
Answer: D
Nortel인증 920-159 920-159 920-159자격증 920-159기출문제
NO.9 Which three CallPilot features are supported by Business Communication Manager
(BCM) 3.0? (Choose three.)
A. ability to annotate faxes
B. ability to save voice messages
C. ability to reject passwords (such as 888888)
D. ability to set message sensitivity to urgent or Normal
Answer: A.B.D
NO.10 .When provisioning the Embedded Local Area Network (ELAN) on a CS 1000 system for a
site with a CallPilot 3.0 system with 96 DSO channels, what number should you set the
maximum number of call registers for CSL input (CSQI in LD 17)?
A. 20
B. 96
C. 192
D. 255
Answer: C
Nortel기출문제 920-159 920-159 pdf 920-159 920-159
ITexamdump의 ACMA_6.1덤프의 VCE테스트프로그램과 00M-622덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-463시험에 대비한 고품질 덤프와 1Z0-536시험 최신버전덤프를 제공해드립니다. 최고품질 646-206시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기