ITExamDump 에서 제공해드리는 IBM인증000-744시험덤프자료를 구입하시면 퍼펙트한 구매후 서비스를 약속드립니다. ITExamDump에서 제공해드리는 덤프는 IT업계 유명인사들이 자신들의 노하우와 경험을 토대로 하여 실제 출제되는 시험문제를 연구하여 제작한 최고품질의 덤프자료입니다. IBM인증000-744시험은ITExamDump 표IBM인증000-744덤프자료로 시험준비를 하시면 시험패스는 아주 간단하게 할수 있습니다. 구매하기전 PDF버전 무료샘플을 다운받아 공부하세요.
ITExamDump를 선택함으로 여러분은 IBM 인증000-744시험에 대한 부담은 사라질 것입니다.우리 ITExamDump는 끊임없는 업데이트로 항상 최신버전의 IBM 인증000-744시험덤프임을 보장해드립니다.만약 덤프품질을 확인하고 싶다면ITExamDump 에서 무료로 제공되는IBM 인증000-744덤프의 일부분 문제를 체험하시면 됩니다.ITExamDump 는 100%의 보장도를 자랑하며IBM 인증000-744시험을 한번에 패스하도록 도와드립니다.
시험 번호/코드: 000-744
시험 이름: IBM (DS4000 Technical Version 1)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 140 문항
업데이트: 2013-12-29
IBM인증 000-744시험패스 공부방법을 찾고 있다면 제일 먼저ITExamDump를 추천해드리고 싶습니다. IBM인증 000-744시험이 많이 어렵다는것은 모두 알고 있는 것입니다. ITExamDump에서 출시한 IBM인증 000-744덤프는 실제시험을 대비하여 연구제작된 멋진 작품으로서 IBM인증 000-744시험적중율이 최고입니다. IBM인증 000-744시험패스를 원하신다면ITExamDump의 제품이 고객님의 소원을 들어줄것입니다.
IBM 000-744인증시험패스 하는 동시에 여러분의 인생에는 획기적인 일 발생한것이죠, 사업에서의 상승세는 당연한것입니다. IT업계종사자라면 누구나 이런 자격증을 취득하고싶어하리라고 믿습니다. 많은 분들이 이렇게 좋은 인증시험은 아주 어렵다고 생각합니다. 네 많습니다. 패스할확율은 아주 낮습니다. 노력하지않고야 당연히 불가능하죠.IBM 000-744시험은 기초지식 그리고 능숙한 전업지식이 필요요 합니다. 우리ITExamDump는 여러분들한테IBM 000-744시험을 쉽게 빨리 패스할 수 있도록 도와주는 사이트입니다. 우리ITExamDump의IBM 000-744시험관련자료로 여러분은 짧은시간내에 간단하게 시험을 패스할수 있습니다. 시간도 절약하고 돈도 적게 들이는 이런 제안은 여러분들한테 딱 좋은 해결책이라고 봅니다.
IBM인증000-744시험은 IT인증시험과목중 가장 인기있는 시험입니다. ITExamDump에서는IBM인증000-744시험에 대비한 공부가이드를 발췌하여 IT인사들의 시험공부 고민을 덜어드립니다. ITExamDump에서 발췌한 IBM인증000-744덤프는 실제시험의 모든 범위를 커버하고 있고 모든 시험유형이 포함되어 있어 시험준비 공부의 완벽한 선택입니다.
IBM인증 000-744시험취득 의향이 있는 분이 이 글을 보게 될것이라 믿고ITExamDump에서 출시한 IBM인증 000-744덤프를 강추합니다. ITExamDump의IBM인증 000-744덤프는 최강 적중율을 자랑하고 있어 시험패스율이 가장 높은 덤프자료로서 뜨거운 인기를 누리고 있습니다. IT인증시험을 패스하여 자격증을 취득하려는 분은ITExamDump제품에 주목해주세요.
만약 아직도 우리를 선택할지에 대하여 망설이고 있다면. 우선은 우리 사이트에서 ITExamDump가 제공하는 무료인 일부 문제와 답을 다운하여 체험해보시고 결정을 내리시길 바랍니다.그러면 우리의 덤프에 믿음이;갈 것이고,우리 또한 우리의 문제와 답들은 무조건 100%통과 율로 아주 고득점으로IBM인증000-744험을 패스하실 수 있습니다,
000-744 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-744.html
NO.1 A customer is combining two separate IT operations in one central location. They are using a DS4800.
Performance has been marginal. You look at the DS4800 Performance Monitor and observe that they are
well within the DS4800 performance specifications. Which tool can be used to determine the cause of the
problem?
A. Capacity Magic
B. Bandwidth Estimator
C. IOMeter
D. Disk Magic
Answer: D
IBM덤프 000-744기출문제 000-744최신덤프 000-744자격증 000-744
NO.2 What does a flashing green LED on a drive indicate?
A. status ok
B. drive active
C. failed drive
D. hot spare in use
Answer: B
IBM pdf 000-744자격증 000-744 dumps 000-744 000-744
NO.3 You arrive at a customer site to implement the DS4000 solution and find that the customer wants to use
RAID 1+0 instead of RAID 5 for everything. What is a possible concern in this situation?
A. capacity
B. random IO performance
C. throughput performance
D. disk rebuild times
Answer: A
IBM 000-744 000-744인증 000-744 000-744 pdf
NO.4 A customer wants to use SATA drives to reduce costs. Which application matches SATA use?
A. TSM
B. Exchange
C. application with low IOPS
D. write once, read many times
Answer: C
IBM dumps 000-744시험문제 000-744덤프 000-744
NO.5 Which statement is FALSE regarding hot spare drives in the DS4000 subsystem?
A. The storage server will attempt to find a spare in the same enclosure as the failed drive first.
B. The storage server will give preference to a spare the same size as the failed drive.
C. The storage server will use a spare with at least the same capacity as the failed drive.
D. The controller may use a spare that is larger than the failed drive and block the remaining capacity
from use.
Answer: B
IBM 000-744 000-744 000-744
NO.6 In addition to the storage administrator's e-mail address, what information do you need to set up
e-mail alerts to be sent to the storage administrator?
A. sender's SMTP server address, the sender's e-mail address
B. sender's POP server address, the sender's e-mail address
C. storage administrator's POP server address, the sender's e-mail address
D. storage administrator's SMTP server address, the sender's e-mail address
Answer: A
IBM dumps 000-744인증 000-744 dumps 000-744 000-744인증
NO.7 To generate a premium feature key that can be installed on a DS4000 subsystem, you must provide
certain information to IBM. This information includes the IBM machine type/model and what additional
information?
A. serial number, activation code, feature enable identifier and e-mail address
B. serial number, activation code, and e-mail address
C. activation code, e-mail address, controller firmware level
D. serial number, and e-mail address, drive firmware level
Answer: A
IBM기출문제 000-744자격증 000-744
NO.8 When examining a profile you see the following:
Drive at Enclosure 5, Slot 8 [mirrored pair with drive at enclosure 5, slot 9]
Drive at Enclosure 5, Slot 9 [mirrored pair with drive at enclosure 5, slot 8]
How should this be configured for enclosure loss protection?
A. Drive at Enclosure 5, Slot 9 [mirrored pair with drive at enclosure 5, slot 9]
Drive at Enclosure 5, Slot 9 [mirrored pair with drive at enclosure 5, slot 9]
B. Drive at Enclosure 3, Slot 1 [mirrored pair with drive at enclosure 5, slot 9]
Drive at Enclosure 5, Slot 9 [mirrored pair with drive at enclosure 3, slot 1]
C. Drive at Enclosure 5, Slot 17 [mirrored pair with drive at enclosure 5, slot 9]
Drive at Enclosure 5, Slot 9 [mirrored pair with drive at enclosure 5, slot 17]
D. Drive at Enclosure 5, Slot 9 [mirrored pair with drive at enclosure 15, slot 19]
Drive at Enclosure 15, Slot 19 [mirrored pair with drive at enclosure 5, slot 9]
Answer: B
IBM dumps 000-744자격증 000-744 000-744기출문제
NO.9 What is the minimum number of HDDs required for RAID 6?
A. 1
B. 2
C. 3
D. 4
Answer: D
IBM덤프 000-744 000-744자료 000-744 dump
NO.10 In the Major Event Log (MEL), what does immediate Availability Initialization (IAF) completed on
logical drive" indicate?
A. The drive has been internally reformatted.
B. The drive has just become accessible by the host.
C. LUN has just been replaced.
D. Hot sparing has occurred.
Answer: A
IBM 000-744 000-744 000-744 pdf 000-744 000-744
NO.11 In the exhibit, which management method is being used?
A. in-band
B. rlogin
C. client-host-band
D. out-of-band
Answer: D
IBM최신덤프 000-744 000-744덤프
NO.12 When configuring a customer's multimedia sequential I/O environment, what must you do?
A. use a small segment size with many disks
B. select a stripe size that is the same or an even multiple of the I/O size
C. use small segment size in conjunction with RAID 0
D. select a segment size that minimizes the occurrences of a single I/O on multiple drives
Answer: B
IBM자격증 000-744 dump 000-744자료 000-744 000-744 dump
NO.13 Three hosts are redundantly connected to a DS4000 system. Two are running a non-clustered
Windows 2003 Server and the other is running Red Hat Linux. How many Storage Partitions are used in
this configuration?
A. 0
B. 1
C. 3
D. 8
Answer: C
IBM시험문제 000-744자료 000-744 pdf
NO.14 What is one disadvantage of managing a storage subsystem through the Fibre Channel IO path?
A. The fibre cable used for data IO cannot be used for management commands.
B. An access logical drive is required to communicate with the controllers.
C. Management commands cannot be encapsulated by the Fibre Channel protocol.
D. Ethernet cables to the controllers are also required to send management commands.
Answer: B
IBM 000-744 000-744인증 000-744덤프 000-744
NO.15 You have been called in to assist the storage administrator who has been using Global Mirror with an
Enhanced Remote Mirroring (ERM) configuration to mirror the company inventory database from
headquarters to a data warehouse at a remote site. The storage administrator has been re-evaluating this
approach and needs your help to change the mirroring mode to Metro Mirroring for better control over
data going to the remote site. What must you do to help the storage administrator make the change?
A. advise the storage administrator to purchase two new licenses
B. break and re-establish the mirror relationship
C. back up the inventory data to tape
D. make the mode change in Storage Manager
Answer: D
IBM 000-744시험문제 000-744 000-744
NO.16 How do you configure SNMP traps in the Storage Manager GUI?
A. from the Subsystem Management window, use the Storage Subsystem menu
B. from the Subsystem Management window, use the Advanced menu
C. from the Enterprise Management window, use the Advanced menu
D. from the Enterprise Management window, use the Edit menu
Answer: D
IBM인증 000-744 000-744기출문제 000-744 dump
NO.17 When performing an array migration, what is NOT required?
A. verification that there is no logical drive name duplication between the source and target systems
B. removal of mappings for all logical drives within the array being migrated
C. documenting the stripe order of the drives in the array for proper placement on the target subsystem
D. Advanced Maintenance Place Array Offline
Answer: C
IBM기출문제 000-744 000-744 000-744
NO.18 Which statement about DS4000 firmware upgrades is true?
A. The controller firmware and NVSRAM files are closely tied to each other and must be installed in the
proper combination.
B. Controller firmware and NVSRAM upgrades always require the ESM firmware to be upgraded at the
same time.
C. Only one controller must be accessible via the Ethernet or fiber in order to perform a controller
firmware upgrade.
D. The controller firmware and NVSRAM are independent from each other and can be upgraded at
different times.
Answer: A
IBM dumps 000-744 000-744 dump 000-744
NO.19 What best describes a drive in eplaced status?
A. a drive that has replaced a failed drive and needs to be revived in order to complete the data recovery
process
B. a temporary status for a drive that has replaced a failed drive, but has not yet been reconstructed
C. a hot spare that has spared out for a failed drive in an array causing the hot spare to become the active
drive in the array
D. the final state of a drive that has replaced a failed drive and has been reconstructed
Answer: B
IBM 000-744시험문제 000-744최신덤프
NO.20 When creating a FlashCopy of a logical drive, a repository logical drive is created. The repository
logical drive is for metadata and copy-on-write data when a change is made to the FlashCopy source
logical drive. By default, what is its size?
A. 10% of the source volume
B. 20% of the source volume
C. 50% of the source volume
D. 100% of the source volume
Answer: B
IBM 000-744 000-744 dump 000-744 000-744시험문제
ITexamdump의 70-460덤프의 VCE테스트프로그램과 1Z0-466덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 FCNSA.v5시험에 대비한 고품질 덤프와 LOT-440시험 최신버전덤프를 제공해드립니다. 최고품질 000-614시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
시험자료링크: http://www.itexamdump.com/000-744.html
