ITExamDump의 SAP 인증 C-TBIT44-71시험덤프공부자료 출시 당시 저희는 이런 크나큰 인지도를 갖출수 있을지 생각도 못했었습니다. 저희를 믿어주시고 구매해주신 분께 너무나도 감사한 마음에 더욱 열심히 해나가자는 결심을 하였습니다. SAP 인증 C-TBIT44-71덤프자료는ITExamDump의 전문가들이 최선을 다하여 갈고닦은 예술품과도 같습니다.100% 시험에서 패스하도록 저희는 항상 힘쓰고 있습니다.
ITExamDump 에서 출시한SAP인증C-TBIT44-71 덤프는SAP인증C-TBIT44-71 실제시험의 출제범위와 출제유형을 대비하여 제작된 최신버전 덤프입니다. 시험문제가 바뀌면 제일 빠른 시일내에 덤프를 업데이트 하도록 최선을 다하고 있으며 1년 무료 업데이트서비스를 제공해드립니다. 1년 무료 업데이트서비스를 제공해드리기에 시험시간을 늦추어도 시험성적에 아무런 페를 끼치지 않습니다. ITExamDump에 믿음을 느낄수 있도록 구매사이트마다 무료샘플 다운가능기능을 설치하였습니다.무료샘플을 체험해보시고ITExamDump을 선택해주세요.
시험 번호/코드: C-TBIT44-71
시험 이름: SAP (SAP Certified Development Associate - Process Integration with SAP NetWeaver (PI 7.1))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 80 문항
업데이트: 2014-02-13
SAP C-TBIT44-71 시험을 어떻게 통과할수 있을가 고민중이신 분들은ITExamDump를 선택해 주세요. ITExamDump는 많은 분들이 IT인증시험을 응시하여 성공하도록 도와주는 사이트입니다. 최고급 품질의SAP C-TBIT44-71시험대비 덤프는SAP C-TBIT44-71시험을 간단하게 패스하도록 힘이 되어드립니다. ITExamDump 의 덤프는 모두 엘리트한 전문가들이 만들어낸 만큼 시험문제의 적중률은 아주 높습니다.
IT업계에 종사하시는 분들은 IT인증시험을 통한 자격증취득의 중요성을 알고 계실것입니다. ITExamDump에서 제공해드리는 인증시험대비 고품질 덤프자료는 제일 착한 가격으로 여러분께 다가갑니다. ITExamDump덤프는 IT인증시험에 대비하여 제작된것으로서 높은 적중율을 자랑하고 있습니다.덤프를 구입하시면 일년무료 업데이트서비스, 시험불합격시 덤프비용환불 등 퍼펙트한 서비스도 받을수 있습니다.
C-TBIT44-71 덤프무료샘플다운로드하기: http://www.itexamdump.com/C-TBIT44-71.html
NO.1 The PI Mail adapter is used to send and receive emails. Which protocols are
supported?
A. SMTP
B. HTTP
C. IMAP4
D. POP3
Answer: A,C,D
SAP시험문제 C-TBIT44-71자료 C-TBIT44-71 dumps C-TBIT44-71 C-TBIT44-71 dump C-TBIT44-71자격증
NO.2 You can create multiple configurations for one Integration Process without changing the
appropriate
process definition.
Which of these parameters allows you to achieve this behavior?
A. Process Signature
B. Container Definition
C. Correlation
D. Configurable Parameters in Conditions
Answer: D
SAP dumps C-TBIT44-71덤프 C-TBIT44-71 pdf C-TBIT44-71 dumps C-TBIT44-71자격증
NO.3 If a system error occurs in a send step, an alert can be triggered for Alert Management
and the
integration process should then be terminated.
Where do you define the Alert Category for the appropriate Control Step?
A. Within the SLD
B. Within the transaction ALRTCATDEF on the Integration Server
C. Within the Enterprise Services Builder
D. Within the Process Editor
Answer: B
SAP C-TBIT44-71덤프 C-TBIT44-71 C-TBIT44-71 dumps C-TBIT44-71 dumps
NO.4 For the delivery mode of an integration process, you can choose between inbound
processing with or
without buffering.
Which of these statements correctly describes the Inbound processing mode?
A. SAP recommends the mode for inbound processing with buffering.
B. SAP recommends the mode for inbound processing without buffering.
C. If you select inbound processing without buffering, the qRFC entry returns an error when a
message is
to be delivered to a process instance for which no receive step is active.
D. If you select inbound processing with buffering and there is no active receive step
available to receive
an incoming message, the message is buffered in a separate, process-instance-specific
queue.
Answer: B,C,D
SAP C-TBIT44-71기출문제 C-TBIT44-71 C-TBIT44-71 C-TBIT44-71
NO.5 You have created a deadline branch. When the deadline has expired, the integration
process should be
canceled.
How can this be achieved?
A. In the deadline branch, insert a control step that cancels the process.
B. The process is automatically stopped once the deadline has expired.
C. As the process can only be stopped by the administrator, a control step that raises an alert
to inform
the administrator has to be inserted.
D. Insert a switch with an appropriate condition to stop the process.
Answer: A
SAP인증 C-TBIT44-71 pdf C-TBIT44-71인증
NO.6 You are implementing an IDoc-based scenario using SAP Netweaver PI and more
specifically the
sender IDoc adapter.
Which of these steps are mandatory for the sender IDoc adapter to function properly?
A. IDoc metadata must be imported into the Enterprise Services Repository.
B. The Logical System name (ALE name) for the Business System must be defined in the
SLD.
C. A sender communication channel must be defined in the Integration Builder.
D. An RFC destination must be defined on the sender system, pointing to the Integration
Server client.
Answer: A,B,D
SAP C-TBIT44-71 C-TBIT44-71자료
NO.7 Which Process Integration objects can be used in an integration process?
A. All objects displayed in the navigation area of the Integration Builder.
B. All objects within the software component version of the integration process.
C. Only the objects within the namespace of the integration process.
D. All objects displayed in the Process Integration Scenario using this process.
Answer: B
SAP인증 C-TBIT44-71 C-TBIT44-71기출문제 C-TBIT44-71
NO.8 To react to situations where it is not possible or not advisable to continue a process in
the normal way,
you can define exceptions.
Which statements correctly describe the triggering of exceptions?
A. A synchronous or asynchronous Send step can trigger an exception when a system error
occurs.
B. Every step type can trigger an exception when a permanent error occurs.
C. A Control step can trigger an exception.
D. A Transformation step can trigger an exception.
E. Exceptions can only be triggered by Control steps.
Answer: A,C,D
SAP시험문제 C-TBIT44-71 C-TBIT44-71 C-TBIT44-71
NO.9 Which of these operations can be performed by a Container Operation step?
A. Incrementing a counter variable.
B. Appending a message to a multiline container element.
C. Removing a message from a multiline container element.
D. Setting the value of an XML element of a message.
Answer: A,B
SAP C-TBIT44-71 C-TBIT44-71 C-TBIT44-71
NO.10 The communication between the Integration Server and the backend applications can
be achieved
without adapters.
Which message protocol should you use for this communication type?
A. RFC-XML
B. PI-SOAP Protocol
C. File
D. JDBC 2.0
Answer: B
SAP pdf C-TBIT44-71자료 C-TBIT44-71 C-TBIT44-71시험문제
NO.11 You have implemented a scenario where IDocs are posted to an ERP system using the
receiver IDoc
adapter.
Which statements correctly describe the receiver IDoc adapter of SAP NetWeaver PI?
A. IDoc packages are not supported, unless all IDocs are collected by BPM.
B. Specific fields in the IDoc control record can be overwritten using the 'header mapping'
functionality in
the Receiver Agreement.
C. Quality of service EOIO (exactly once in order) is supported, provided that the target
system is a SAP
Web AS 6.40 or above.
D. If the target system is SAP Web AS 6.20 or under, then the quality of service BE (best
effort) and EO
(exactly once) can be used.
E. A receiver communication channel must be defined in the Integration Builder.
Answer: B,C,E
SAP C-TBIT44-71 C-TBIT44-71최신덤프
NO.12 A special aspect in B2B business processes is that the business partners involved in
these processes
do not usually provide information about their internal system landscape.
Which configuration objects are relevant for B2B configuration?
A. Receiver Determination
B. Communication Party
C. Software Component Version (SWCV)
D. Communication Channel
Answer: A,B,D
SAP C-TBIT44-71 C-TBIT44-71최신덤프 C-TBIT44-71 C-TBIT44-71
NO.13 You configure the sender RFC adapter to convert RFC calls from a sender to XML
messages. These
XML messages are then sent to the Integration Server or to the PCK.
What is the purpose of the RFC adapter parameter "Program ID"?
A. The Program ID is a unique identifier for outbound proxies.
B. The Program ID must uniquely describe the RFC sender communication channel in the
configured
application server gateway.
C. The Program ID identifies proxy classes for Service Interfaces.
D. The Program ID is used in correlation for binding abstract interfaces.
Answer: B
SAP최신덤프 C-TBIT44-71 dumps C-TBIT44-71자료 C-TBIT44-71 pdf
NO.14 Which statements are correct when using the Receiver File adapter to process XML
messages?
A. The messages are processed based on a poll cycle.
B. The adapter can convert the XML payload into a flat file.
C. The adapter can FTP the file to a remote directory.
D. The quality of service can be 'best effort' (BE) only.
Answer: B,C
SAP자격증 C-TBIT44-71최신덤프 C-TBIT44-71기출문제 C-TBIT44-71 C-TBIT44-71 pdf C-TBIT44-71
NO.15 Assume that your customer has a scenario in which a database table needs to be
queried (i.e. to
perform a SELECT statement and obtain the result set).
What are the viable options for implementing this with the PI JDBC adapter?
A. Use the sender JDBC adapter to query the database asynchronously.
B. Use the sender JDBC adapter to query the database synchronously.
C. Use the receiver JDBC adapter to query the database synchronously.
D. Use the receiver JDBC adapter to query the database asynchronously.
Answer: A,C
SAP C-TBIT44-71 C-TBIT44-71
ITexamdump의 70-492덤프의 VCE테스트프로그램과 200-120덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 HP0-J62시험에 대비한 고품질 덤프와 MB5-700시험 최신버전덤프를 제공해드립니다. 최고품질 C_TAW12_731시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기