CompTIA PD1-001인증시험패스는 아주 어렵습니다. 자기에맞는 현명한 학습자료선택은 성공을 내딛는 첫발입니다. 퍼펙트한 자료만의 시험에 성공할수 있습니다. Pass4Tes시험문제와 답이야 말로 퍼펙트한 자료이죠. 우리CompTIA PD1-001인증시험자료는 100%보장을 드립니다. 또한 구매 후 일년무료 업데이트버전을 받을 수 있는 기회를 얻을 수 있습니다.
ITExamDump는IT업계전문가들이 그들의 노하우와 몇 년간의 경험 등으로 자료의 정확도를 높여 응시자들의 요구를 만족시켜 드립니다. 우리는 꼭 한번에CompTIA PD1-001시험을 패스할 수 있도록 도와드릴 것입니다. 여러분은CompTIA PD1-001시험자료 구매로 제일 정확하고 또 최신시험버전의 문제와 답을 사용할 수 있습니다. Pass4Tes의 인증시험적중 율은 아주 높습니다. 때문에 많은 IT인증시험준비중인분들에세 많은 편리를 드릴수 있습니다.100%정확도 100%신뢰.여러분은 마음편히 응시하시면 됩니다.
ITExamDump의 CompTIA 인증 PD1-001시험덤프공부자료는 pdf버전과 소프트웨어버전 두가지 버전으로 제공되는데 CompTIA 인증 PD1-001실제시험예상문제가 포함되어있습니다.덤프의 예상문제는 CompTIA 인증 PD1-001실제시험의 대부분 문제를 적중하여 높은 통과율과 점유율을 자랑하고 있습니다. ITExamDump의 CompTIA 인증 PD1-001덤프를 선택하시면 IT자격증 취득에 더할것 없는 힘이 될것입니다.
ITExamDump 의 CompTIA인증 PD1-001시험에 도전장을 던지셨나요? 현황에 만족하지 않고 열심히 하는 모습에 박수를 보내드립니다. CompTIA인증 PD1-001시험을 학원등록하지 않고 많은 공부자료 필요없이ITExamDump 에서 제공해드리는 CompTIA인증 PD1-001덤프만으로도 가능합니다. 수많은 분들이 검증한CompTIA인증 PD1-001덤프는 시장에서 가장 최신버전입니다.가격도 친근하구요.
시험 번호/코드: PD1-001
시험 이름: CompTIA (CompTIA PDI+ Beta Exam)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 861 문항
업데이트: 2014-02-20
PD1-001 덤프무료샘플다운로드하기: http://www.itexamdump.com/PD1-001.html
NO.1 In which of the following sections of an MFP would a technician find a Xenon Lamp?
A.The paper feed section
B.The fuser section
C.The scanner section
D.The transfer section
Answer: C
CompTIA기출문제 PD1-001기출문제 PD1-001 PD1-001시험문제 PD1-001시험문제
NO.2 During the photoconductor preparation step, residual charge can be removed by which of the
following? (Select TWO).
A.Pressure
B.Oil
C.Light
D.Gravity
E.Electrical Charge
Answer: CE
CompTIA PD1-001인증 PD1-001 PD1-001자료 PD1-001 PD1-001
NO.3 The polygon mirror is located in which of the following components?
A.Developer unit
B.Scanner unit
C.Fuser unit
D.Laser unit
Answer: D
CompTIA PD1-001 dumps PD1-001 PD1-001 PD1-001
NO.4 When is it advisable to dump the waste toner from a technicians service vacuum?
A.When it is full.
B.It is not recommended.
C.Before performing preventative maintenance.
D.After each call.
Answer: B
CompTIA PD1-001자료 PD1-001
NO.5 Which of the following stages in the laser print process attracts toner to the latent image on the
photoconductor?
A.Writing
B.Fusing
C.Development
D.Transfer
Answer: C
CompTIA PD1-001 PD1-001기출문제 PD1-001 dumps
NO.6 A customer is concerned about excessive media jamming in their device. Which of the following is the
FIRST thing a technician should check?
A.Media feed rollers
B.Cassette drawers
C.Fusing section
D.Device log data
Answer: D
CompTIA덤프 PD1-001 PD1-001자격증 PD1-001덤프 PD1-001
NO.7 A customer has installed a new computer on their network. They can print to the printer but the option
for duplex printing is not available. All other computers have the option. Which of the following is the
cause of the problem?
A.The new computer is printing to the wrong IP address.
B.The new computer is using the wrong protocol.
C.The driver port is not setup correctly.
D.The option has not been selected on the driver.
Answer: D
CompTIA PD1-001 PD1-001덤프 PD1-001자격증
NO.8 The proper safety guidelines for handling any device specific consumables can be found in which of
the following documentation?
A.Material Safety Data Sheets
B.Installation Guides
C.Consumer Reports
D.Devices Parts Catalog
Answer: A
CompTIA pdf PD1-001시험문제 PD1-001최신덤프 PD1-001 PD1-001
NO.9 Using the CMYK color model, the color purple is produced by combining cyan and which other color?
A.Green
B.Magenta
C.Yellow
D.Black
Answer: B
CompTIA PD1-001 PD1-001 PD1-001 PD1-001덤프
NO.10 A polygon mirror is part of which of the following assemblies?
A.Laser unit
B.Developer unit
C.Charge assembly
D.Fuser assembly
Answer: A
CompTIA덤프 PD1-001인증 PD1-001 pdf PD1-001자료 PD1-001
NO.11 An encoder sensor typically detects:
A.paper position.
B.shaft rotation.
C.magnetic flux.
D.laser beam strength.
Answer: B
CompTIA PD1-001 PD1-001인증 PD1-001
NO.12 How many CCDs are located in a single pass duplex ADF?
A.One
B.2
C.3
D.4
Answer: B
CompTIA PD1-001 dump PD1-001시험문제 PD1-001 pdf
NO.13 Which of the following would be the BEST process for the technician to follow when beginning to
diagnose a unit at a customers site?
A.Check the printers error log, and then inform the primary user what the issue is.
B.Go directly to the printer and investigate any issues that are found.
C.Investigate the printers status, then ask the primary user to write down what they think is wrong.
D.Gather information from the primary user, and then evaluate the printers condition.
Answer: D
CompTIA기출문제 PD1-001 pdf PD1-001기출문제 PD1-001 pdf PD1-001 pdf
NO.14 Which of the following utilities could be used to determine a subnet mask?
A.PING
B.NSLOOKUP
C.TRACERT
D.IPCONFIG
Answer: D
CompTIA자료 PD1-001시험문제 PD1-001 PD1-001 PD1-001 dump
NO.15 Which of the following is a reason black toner is used in color printers?
A.It decreases the print speed in color laser printers.
B.It prevents moir patterns when printing color photographs.
C.It reduces the cost per page when printing gray scale documents.
D.It makes the color toner resistant to smudging when wet.
Answer: C
CompTIA시험문제 PD1-001 PD1-001기출문제 PD1-001
NO.16 Which of the following components is part of the ink dispersion system?
A.Print Heads
B.Cleaning heads
C.Pickup Roller
D.Charge Assembly
Answer: A
CompTIA인증 PD1-001 dumps PD1-001 pdf PD1-001
NO.17 The customer has a dedicated ink jet fax machine that is used to send and receive faxes only from the
corporate office. The user complains of streaks on the received faxes while the internal self-prints are fine.
Which of the following should a technician recommend?
A.Clean the scanner glass on the distant machine.
B.Clean the scanner glass on the local machine.
C.Clean the printer head on the local machine.
D.Call the telephone company to increase the line signal level.
Answer: A
CompTIA기출문제 PD1-001 PD1-001
NO.18 Which of the following is the purpose of a torque limiter in a roller?
A.To reduce wear and tear on rollers.
B.To provide resistance but still allow some slippage.
C.To limit the amount of movement by media.
D.To make it easier to replace rollers.
Answer: B
CompTIA PD1-001 PD1-001최신덤프
NO.19 A technician is troubleshooting a network connectivity issue on a MFD and would like to eliminate the
possibility of another device on the network having the same IP address. The technician should:
A.disconnect the MFD and ping the IP address.
B.disconnect the MFD and ping the subnet mask.
C.disconnect the MFD and ping the loopback address.
D.run the ipconfig command from the command prompt.
Answer: A
CompTIA최신덤프 PD1-001 PD1-001자료 PD1-001 PD1-001
NO.20 Which of the following functions is associated with the developer unit?
A.Supplies toner to the photoconductor
B.Charges the surface of the photoconductor
C.Writes the latent image on the photoconductor
D.Cleans the photoconductor
Answer: A
CompTIA PD1-001 PD1-001 PD1-001
ITexamdump의 HP3-C33덤프의 VCE테스트프로그램과 1z0-457덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 HP2-E58시험에 대비한 고품질 덤프와 000-283시험 최신버전덤프를 제공해드립니다. 최고품질 IIA-CIA-Part1시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기