Microsoft 인증 070-502 덤프

많은 시간과 정신력을 투자하고 모험으로Microsoft인증070-502시험에 도전하시겠습니까? 아니면 우리ITExamDump 의 도움으로 시간을 절약하시겠습니까? 요즘 같은 시간인 즉 모든 것인 시대에 여러분은 당연히 ITExamDump의 제품이 딱 이라고 생각합니다. 그리고 우리 또한 그 많은 덤프판매사이트 중에서도 단연 일등이고 생각합니다. 우리 ITExamDump선택함으로 여러분은 성공을 선택한 것입니다.

ITExamDump 에서 제공해드리는 Microsoft 070-502덤프는 아주 우수한 IT인증덤프자료 사이트입니다. IT업계엘리트한 강사들이 퍼펙트한 Microsoft 070-502 덤프문제집을 제작하여 디테일한 시험문제와 답으로 여러분이 아주 간단히Microsoft 070-502시험을 패스할 수 있도록 최선을 다하고 있습니다.

ITExamDump의 경험이 풍부한 IT전문가들이 연구제작해낸 Microsoft인증 070-502덤프는 시험패스율이 100%에 가까워 시험의 첫번째 도전에서 한방에 시험패스하도록 도와드립니다. Microsoft인증 070-502덤프는Microsoft인증 070-502최신 실제시험문제의 모든 시험문제를 커버하고 있어 덤프에 있는 내용만 공부하시면 아무런 걱정없이 시험에 도전할수 있습니다.

Microsoft 070-502인증시험은 현재IT인사들 중 아주 인기 잇는 인증시험입니다.Microsoft 070-502시험패스는 여러분의 하시는 일과 생활에서 많은 도움을 줄뿐만 아니라 중요한 건 여러분의IT업계에서의 자기만의 자리를 지키실 수 잇습니다.이렇게 좋은 시험이니 많은 분들이 응시하려고 합니다,하지만 패스 율은 아주 낮습니다.

ITExamDump 는 여러분의 it전문가 꿈을 이루어드리는 사이트 입다. ITExamDump는 여러분이 우리 자료로 관심 가는 인중시험에 응시하여 안전하게 자격증을 취득할 수 있도록 도와드립니다. 아직도Microsoft 070-502인증시험으로 고민하시고 계십니까?Microsoft 070-502인증시험가이드를 사용하실 생각은 없나요? ITExamDump는 여러분에 편리를 드릴 수 잇습니다. ITExamDump의 자료는 시험대비최고의 덤프로 시험패스는 문제없습니다. ITExamDump의 각종인증시험자료는 모두기출문제와 같은 것으로 덤프보고 시험패스는 문제없습니다. ITExamDump의 퍼펙트한 덤프인 M crosoft070-502인증시험자료의 문제와 답만 열심히 공부하면 여러분은 완전 안전히Microsoft 070-502인증자격증을 취득하실 수 있습니다.

시험 번호/코드: 070-502
시험 이름: Microsoft (TS: Microsoft .NET Framework 3.5 – Windows Presentation Foundation)

많은 사이트에서 Microsoft인증 070-502시험대비덤프를 제공해드리는데ITExamDump를 최강 추천합니다. ITExamDump의Microsoft인증 070-502덤프에는 실제시험문제의 기출문제와 예상문제가 수록되어있어 그 품질 하나 끝내줍니다.적중율 좋고 가격저렴한 고품질 덤프는ITExamDump에 있습니다.

070-502 덤프무료샘플다운로드하기: http://www.itexamdump.com/070-502.html

NO.1 You have created a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5. The application, named EnterpriseApplication.exe, runs over the network.
You add the WindowSize parameter and the WindowPosition parameter to the Settings.settings file by
using the designer at the User Scope Level. The dimensions and position of the window are read from the
user configuration file.
The application must retain the original window size and position for users executing the application.
You need to ensure that the following requirements are met:
?The window dimensions for each user are saved in the user configuration file.
?User settings persist when a user exits the application.
Which configuration setting should you use?
A. Private Sub OnClosing(ByVal sender As Object, ByVal e _
As System.ComponentModel.CancelEventArgs)
My.Settings.Default.WindowPosition = New Point(Me.Left, Me.Top)
My.Settings.Default.WindowSize = New Size(Me.Width, Me.Height)
My.Settings.Default.Save()
End Sub
B. Private Sub OnClosing(ByVal sender As Object, ByVal e As _
System.ComponentModel.CancelEventArgs)
Dim appKey As RegistryKey = _
Registry.CurrentUser.CreateSubKey("Software\EnterpriseApplication")
Dim settingsKey As RegistryKey = _
appKey.CreateSubKey("WindowSettings")
Dim windowPositionKey As RegistryKey = _
settingsKey.CreateSubKey("WindowPosition")
Dim windowSizeKey As RegistryKey = _
settingsKey.CreateSubKey("WindowSize")
windowPositionKey.SetValue("X", Me.Left)
windowPositionKey.SetValue("Y", Me.Top)
windowSizeKey.SetValue("Width", Me.Width)
windowSizeKey.SetValue("Height", Me.Height)
End Sub
C. Private Sub OnClosing(ByVal sender As Object, ByVal e As _
System.ComponentModel.CancelEventArgs)
Dim doc As New System.Xml.XmlDocument()
doc.Load("EnterpriseApplication.exe.config")
Dim nodePosition As System.Xml.XmlNode = _
doc.SelectSingleNode("//setting[@name='WindowPosition']")
nodePosition.ChildNodes(0).InnerText = String.Format("{0},{1}", _
Me.Left, Me.Top)
Dim nodeSize As System.Xml.XmlNode = _
doc.SelectSingleNode("//setting[@name='WindowSize']")
nodeSize.ChildNodes(0).InnerText = String.Format("{0},{1}", _
Me.Width, Me.Height)
doc.Save("UserConfigDistractor2.exe.config")
End Sub
D. Private Sub Window_Closing(ByVal sender As Object, ByVal e As _
System.ComponentModel.CancelEventArgs)
Dim sw As New StreamWriter("EnterpriseApplication.exe.config", True)
sw.WriteLine("<EnterpriseApplication.Properties.Settings>")
sw.WriteLine("<setting name=""WindowSize"" serializeAs=""String"">")
sw.WriteLine(String.Format("<value>{0},{1}</value>", Me.Width, _
Me.Height))
sw.WriteLine("</setting>")
sw.WriteLine("<setting name=""WindowPosition"" _
serializeAs=""String"">")
sw.WriteLine(String.Format("<value>{0},{1}</value>", Me.Left, _
Me.Top))
sw.WriteLine("</setting>")
sw.WriteLine("</UserConfigProblem.Properties.Settings>")
sw.Close()
End Sub
Answer: A

Microsoft   070-502   070-502덤프   070-502자료   070-502 dump

NO.2 You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
The application defines a BrowserWindow class. Each instance of the BrowserWindow class allows the
user to browse a Web site in a separate window. When a new browser window is opened, the user is
redirected to a predefined URL.
You write the following code segment.
01 Private Sub OpenNewWindow(ByVal sender As Object, _
02 ?ByVal e As RoutedEventArgs)
03 Dim newWindowThread As New Thread(New _
04 ThreadStart(AddressOf NewThreadProc))
05
06 newWindowThread.Start()
07 End Sub
08 Private Sub NewThreadProc()
09 10 End Sub
You need to ensure that the following requirements are met:
?The main window of the application is not blocked when an additional browser window is created.
?The application completes execution when the main window of the application is closed.
What should you do?
A. Insert the following code segment at line 05.
newWindowThread.SetApartmentState(ApartmentState.STA)
newWindowThread.IsBackground = True
Insert the following code segment at line 09.
Dim newWindow As New BrowserWindow()
newWindow.Show()
Dim app As New Application()
app.Run(newWindow)
B. Insert the following code segment at line 05.
newWindowThread.IsBackground = True
Insert the following code segment at line 09.
newWindowThread.SetApartmentState(ApartmentState.STA)
Dim newWindow As New BrowserWindow()
newWindow.Show()
Dim app As New Application()
app.Run(newWindow)
C. Insert the following code segment at line 05.
newWindowThread.SetApartmentState(ApartmentState.STA)
newWindowThread.IsBackground = False
Insert the following code segment at line 09.
Dim newWindow As New BrowserWindow()
System.Windows.Threading.Dispatcher.Run()
newWindow.Show()
D. Insert the following code segment at line 05.
newWindowThread.SetApartmentState(ApartmentState.STA)
newWindowThread.IsBackground = True
Insert the following code segment at line 09.
Dim newWindow As New BrowserWindow()
newWindow.Show()
System.Windows.Threading.Dispatcher.Run()
Answer: D 7. You are creating a Windows Presentation Foundation application by using Microsoft .NET
Framework 3.5.
The application uses several asynchronous operations to calculate data that is displayed to the user. An
operation named tommorowsWeather performs calculations that will be used by other operations.
You need to ensure that tommorowsWeather runs at the highest possible priority.
Which code segment should you use?
A. tomorrowsWeather.Dispatcher.BeginInvoke(
System.Windows.Threading.DispatcherPriority.Normal,
new OneArgDelegate(UpdateUserInterface),
weather);
B. tomorrowsWeather.Dispatcher.BeginInvoke(
System.Windows.Threading.DispatcherPriority.DataBind,
new OneArgDelegate(UpdateUserInterface),
weather);
C. tomorrowsWeather.Dispatcher.BeginInvoke(
System.Windows.Threading.DispatcherPriority.Send,
new OneArgDelegate(UpdateUserInterface),
weather);
D. tomorrowsWeather.Dispatcher.BeginInvoke(
System.Windows.Threading.DispatcherPriority.Render,
new OneArgDelegate(UpdateUserInterface),
weather);
Answer: C 8. You are creating a Windows Presentation Foundation application by using Microsoft .NET
Framework 3.5.
The application uses several asynchronous operations to calculate data that is displayed to the user. An
operation named tommorowsWeather performs calculations that will be used by other operations.
You need to ensure that tommorowsWeather runs at the highest possible priority.
Which code segment should you use?
A. tomorrowsWeather.Dispatcher.BeginInvoke( _
System.Windows.Threading.DispatcherPriority.Normal, _
New OneArgDelegate(AddressOf UpdateUserInterface), weather)
B. tomorrowsWeather.Dispatcher.BeginInvoke( _
?System.Windows.Threading.DispatcherPriority.DataBind, _
?New OneArgDelegate(AddressOf UpdateUserInterface), weather)
C. tomorrowsWeather.Dispatcher.BeginInvoke( _
System.Windows.Threading.DispatcherPriority.Send, _
New OneArgDelegate(AddressOf UpdateUserInterface), weather)
D. tomorrowsWeather.Dispatcher.BeginInvoke( _
System.Windows.Threading.DispatcherPriority.Render, _
New OneArgDelegate(AddressOf UpdateUserInterface), weather)
Answer: C 9. You are creating a Windows Presentation Foundation application by using Microsoft .NET
Framework 3.5.
You create a window for the application.
You need to ensure that the following requirements are met:
?An array of strings is displayed by using a ListBox control in a two-column format.
?The data in the ListBox control flows from left to right and from top to bottom.
What should you do?
A. Use a ListBox control defined in the following manner.
<ListBox Name="myList">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<UniformGrid Columns="2"/>
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
Use the following C# code to associate the array of strings to the ListBox control.
myList.ItemsSource = arrayOfString;
B. Use a ListBox control defined in the following manner.
<ListBox Name="myList">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<StackPanel />
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
Use the following C# code to associate the array of strings to the ListBox control.
myList.ItemsSource = arrayOfString;
C. Use a ListBox control defined in the following manner.
<ListBox Name="myList">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<WrapPanel />
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
Use the following C# code to associate the array of strings to the ListBox control.
myListView.ItemsSource = arrayOfString;
D. Use a ListBox control defined in the following manner.
<ListBox Name="myList">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<Grid>
<Grid.ColumnDefinitions>
<ColumnDefinition />
<ColumnDefinition />
</Grid.ColumnDefinitions>
</Grid>
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
Use the following C# code to associate the array of strings to the ListBox control.
myList.ItemsSource = arrayOfString;
Answer: A

Microsoft덤프   070-502   070-502
10. You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
You create a window for the application.
You need to ensure that the following requirements are met:
?An array of strings is displayed by using a ListBox control in a two-column format.
?The data in the ListBox control flows from left to right and from top to bottom.
What should you do?
A. Use a ListBox control defined in the following manner.
<ListBox Name="myList">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<UniformGrid Columns="2"/>
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
Use the following VB.net code to associate the array of strings to the ListBox control.
myList.ItemsSource = arrayOfString
B. Use a ListBox control defined in the following manner.
<ListBox Name="myList">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<StackPanel />
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
Use the following vb.net code to associate the array of strings to the ListBox control.
myList.ItemsSource = arrayOfString
C. Use a ListBox control defined in the following manner.
<ListBox Name="myList">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<WrapPanel />
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
Use the following vb.net code to associate the array of strings to the ListBox control.
myListView.ItemsSource = arrayOfString
D. Use a ListBox control defined in the following manner.
<ListBox Name="myList">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<Grid>
<Grid.ColumnDefinitions>
<ColumnDefinition />
<ColumnDefinition />
</Grid.ColumnDefinitions>
</Grid>
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
Use the following vb.net code to associate the array of strings to the ListBox control.
myList.ItemsSource = arrayOfString
Answer: A

Microsoft   070-502기출문제   070-502   070-502   070-502자료   070-502자격증
11. You create a form by using Windows Presentation Foundation and Microsoft .NET Framework 3.5.
The form contains a status bar.
You plan to add a ProgressBar control to the status bar.
You need to ensure that the ProgressBar control displays the progress of a task for which you cannot
predict the completion time.
Which code segment should you use?
A. progbar.IsIndeterminate = true;
B. progbar.IsIndeterminate = false;
C. progbar.HasAnimatedProperties = true;
D. progbar.HasAnimatedProperties = false;
Answer: A

Microsoft dump   070-502최신덤프   070-502   070-502   070-502 dumps
12. You create a form by using Windows Presentation Foundation and Microsoft .NET Framework 3.5.
The form contains a status bar.
You plan to add a ProgressBar control to the status bar.
You need to ensure that the ProgressBar control displays the progress of a task for which you cannot
predict the completion time.
Which code segment should you use?
A. progbar.IsIndeterminate = True
B. progbar.IsIndeterminate = False
C. progbar.HasAnimatedProperties = True
D. progbar.HasAnimatedProperties = False
Answer: A

Microsoft   070-502   070-502
13. You are converting a Windows Forms application to a Windows Presentation Foundation (WPF)
application. You use Microsoft .NET Framework 3.5 to create the WPF application.
The WPF application will reuse 30 forms of the Windows Forms application.
The WPF application contains the following class definition.
public class OwnerWindow :
System.Windows.Forms.IWin32Window
private IntPtr handle;
public IntPtr Handle
get { return handle; }
set { handle=value; }
}
}
You write the following code segment in the WPF application. (Line numbers are included for reference
only.)
01 public DialogResult LaunchWindowsFormsDialog(
02 ?Form dialog, Window wpfParent)
03 {
04 WindowInteropHelper helper=new
05 ?WindowInteropHelper(wpfParent);
06 OwnerWindow owner=new OwnerWindow();
07
08 }
You need to ensure that the application can launch the reusable forms as modal dialogs.
Which code segment should you insert at line 07?
A.owner.Handle = helper.Owner;
return dialog.ShowDialog(owner);
B. owner.Handle = helper.Handle;
return dialog.ShowDialog(owner);
C. owner.Handle = helper.Owner;
bool? result = wpfParent.ShowDialog();
if (result.HasValue)
return result.Value ? System.Windows.Forms.DialogResult.OK :
System.Windows.Forms.DialogResult.Cancel;
else
return System.Windows.Forms.DialogResult.Cancel;
D. owner.Handle = helper.Handle;
bool? result = wpfParent.ShowDialog();
if (result.HasValue)
return result.Value ? System.Windows.Forms.DialogResult.OK :
System.Windows.Forms.DialogResult.Cancel;
else
return System.Windows.Forms.DialogResult.Cancel;
Answer: B

Microsoft   070-502 dumps   070-502   070-502
14. You are converting a Windows Forms application to a Windows Presentation Foundation (WPF)
application. You use Microsoft .NET Framework 3.5 to create the WPF application.
The WPF application will reuse 30 forms of the Windows Forms application.
The WPF application contains the following class definition.
Public Class OwnerWindow
Implements System.Windows.Forms.IWin32Window
Private handle_Renamed As IntPtr
Public Property Handle() As IntPtr _
Implements System.Windows.Forms.IWin32Window.Handle
Get
Return handle_Renamed
End Get
Set(ByVal value As IntPtr)
handle_Renamed = value
End Set
End Property
End Class
You write the following code segment in the WPF application. (Line numbers are included for reference
only.)
01 Public Function LaunchWindowsFormsDialog(ByVal dialog As _
02 ?System.Windows.Forms.Form, ByVal wpfParent As Window) As _
03 ?System.Windows.Forms.DialogResult
04 Dim helper As New
05 System.Windows.Interop.WindowInteropHelper(wpfParent)
07 Dim owner As New OwnerWindow()
08
09 End Function
You need to ensure that the application can launch the reusable forms as modal dialogs.
Which code segment should you insert at line 08?
Aowner.Handle = helper.Owner
Dim db As New System.Windows.Forms.DialogResult()
Return db
B. owner.Handle = helper.Owner
Return dialog.ShowDialog(owner)
C. owner.Handle = helper.Owner
Dim result As Nullable(Of Boolean) = wpfParent.ShowDialog()
If result.HasValue Then
eturn If(result.Value, System.Windows.Forms.DialogResult.OK, _
?System.Windows.Forms.DialogResult.Cancel)
Else
Return System.Windows.Forms.DialogResult.Cancel
End If
D. owner.Handle = helper.Handle
Dim result As Nullable(Of Boolean) = wpfParent.ShowDialog()
If result.HasValue Then
Return If(result.Value, System.Windows.Forms.DialogResult.OK, _
?System.Windows.Forms.DialogResult.Cancel)
Else
Return System.Windows.Forms.DialogResult.Cancel
End If
Answer: B 15. You are creating a Windows Presentation Foundation (WPF) application by using
Microsoft .NET Framework 3.5.
The WPF application has a Grid control named rootGrid.
You write the following XAML code fragment.
<Window x:Class="MCP.HostingWinFormsControls"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/
presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
Title="HostingWinFormsControls"
Loaded="Window_Loaded">
<Grid x:Name="rootGrid">
</Grid>
</Window>
You need to ensure that each time the WPF window opens, a Windows Forms control named
MyCustomFormsControl is added to rootGrid.
Which code segment should you use?
A.private void Window_Loaded(object sender, RoutedEventArgs e)
WindowsFormsHost host = new WindowsFormsHost();
MyCustomFormsControl formsControl = new MyCustomFormsControl();
host.Child = formsControl;
rootGrid.Children.Add(host);
B. private void Window_Loaded(object sender, RoutedEventArgs e)
ElementHost host = new ElementHost();
MyCustomFormsControl formsControl=new MyCustomFormsControl();
host.Child=formsControl;
rootGrid.Children.Add(host);
C. private void Window_Loaded(object sender, RoutedEventArgs e)
MyCustomFormsControl formsControl=new MyCustomFormsControl();
formsControl.CreateControl();
HwndSource source = HwndSource.FromHwnd(formsControl.Handle);
UIElement formsElement = source.RootVisual as UIElement;
rootGrid.Children.Add(formsElement);
D. private void Window_Loaded(object sender, RoutedEventArgs e)
MyCustomFormsControl formsControl=new MyCustomFormsControl();
formsControl.CreateControl();
HwndTarget target = new HwndTarget(formsControl.Handle);
UIElement formsElement = target.RootVisual as UIElement;
rootGrid.Children.Add(formsElement);
Answer: A

Microsoft   070-502   070-502자격증   070-502   070-502자격증   070-502
16.You are creating a Windows Presentation Foundation (WPF) application by using Microsoft .NET
Framework 3.5.
The WPF application has a Grid control named rootGrid.
You write the following XAML code fragment.
<Window x:Class="MCP.HostingWinFormsControls"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/
presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
Title="HostingWinFormsControls"
Loaded="Window_Loaded">
<Grid x:Name="rootGrid">
</Grid>
</Window>
You need to ensure that each time the WPF window opens, a Windows Forms control named
MyCustomFormsControl is added to rootGrid.
Which code segment should you use?
APrivate Sub Window_Loaded(ByVal sender As Object, ByVal e As _
RoutedEventArgs)
Dim host As New WindowsFormsHost()
Dim formsControl As New MyCustomFormsControl()
host.Child = formsControl;
rootGrid.Children.Add(host);
End Sub
B. Private Sub Window_Loaded(ByVal sender As Object, ByVal e As _
RoutedEventArgs)
Dim host As New ElementHost()
Dim formsControl As New MyCustomFormsControl()
host.Child = formsControl;
rootGrid.Children.Add(host);
End Sub
C. Private Sub Window_Loaded(ByVal sender As Object, ByVal e As _
RoutedEventArgs)
Dim formsControl As New MyCustomFormsControl()
formsControl.CreateControl()
Dim target As New HwndTarget(formsControl.Handle)
Dim formsElement As UIElement = TryCast(target.RootVisual, _
UIElement)
rootGrid.Children.Add(formsElement)
End Sub
D. Private Sub Window_Loaded(ByVal sender As Object, ByVal e As _
RoutedEventArgs)
Dim formsControl As New MyCustomFormsControl()
formsControl.CreateControl()
Dim source As HwndSource = HwndSource.FromHwnd(formsControl.Handle)
Dim formsElement As UIElement = TryCast(source.RootVisual, _
UIElement)
rootGrid.Children.Add(formsElement)
End Sub
Answer: A

Microsoft   070-502 dump   070-502자격증   070-502 dumps   070-502덤프   070-502
17. You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
You include functionality in the application to troubleshoot the window behavior.
You need to display a list of UI elements at a position in the window that is decided by the mouse click.
You also need to ensure that the list of elements is displayed in a message box.
Which code segment should you include in the code-behind file?
Astring controlsToDisplay = string.Empty;
private void Window_MouseDown(object sender, MouseButtonEventArgs e) {
controlsToDisplay = ((UIElement)sender).ToString();
MessageBox.Show(controlsToDisplay);
B. string controlsToDisplay = string.Empty;
private void Window_MouseDown(object sender, MouseButtonEventArgs e) {
for (int i = 0; i < this.VisualChildrenCount; i++) {
controlsToDisplay + = this.GetVisualChild(i).ToString() + "\r\n";
MessageBox.Show(controlsToDisplay);
C. string controlsToDisplay = string.Empty;
private void Window_MouseDown (object sender, MouseButtonEventArgs e)
Visual myVisual;
for (int i = 0; i < VisualTreeHelper.GetChildrenCount(sender as
Visual); i++) {
myVisual = (Visual)VisualTreeHelper.GetChild(sender as Visual, i);
controlsToDisplay += myVisual.GetType().ToString() + "\r\n";
MessageBox.Show(controlsToDisplay);
D. string controlsToDisplay = string.Empty;
private void Window_MouseDown(object sender, MouseButtonEventArgs e) {
Point pt = e.GetPosition(this);
VisualTreeHelper.HitTest(this, null, new
HitTestResultCallback(HitTestCallback), new
PointHitTestParameters(pt));
MessageBox.Show(controlsToDisplay);
private HitTestResultBehavior HitTestCallback(HitTestResult result) {
controlsToDisplay += result.VisualHit.GetType().ToString() + "\r\n";
return HitTestResultBehavior.Continue;
Answer: D

Microsoft   070-502   070-502덤프   070-502
18. You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
You include functionality in the application to troubleshoot the window behavior.
You need to display a list of UI elements at a position in the window that is decided by the mouse click.
You also need to ensure that the list of elements is displayed in a message box.
Which code segment should you include in the code-behind file?
A.Dim controlsToDisplay As String = String.Empty
Private Sub Window_MouseDown(ByVal sender As Object, _
ByVal e As MouseButtonEventArgs)
controlsToDisplay = CType(sender, UIElement).ToString()
MessageBox.Show(controlsToDisplay)
End Sub
B. Dim controlsToDisplay As String = String.Empty
Private Sub Window_MouseDown(ByVal sender As Object, _
ByVal e As MouseButtonEventArgs)
For i = 0 To VisualChildrenCount - 1
controlsToDisplay += GetVisualChild(i).ToString() + "\r\n"
Next
MessageBox.Show(controlsToDisplay)
End Sub
C. Dim controlsToDisplay As String = String.Empty
Private Sub Window_MouseDown(ByVal sender As Object, _
ByVal e As MouseButtonEventArgs)
Dim myVisual As Visual()
For i = 0 To VisualTreeHelper.GetChildrenCount(CType(sender, _
Visual)) - 1
myVisual(i) = CType(VisualTreeHelper.GetChild(CType(sender, _
Visual), i), Visual)
controlsToDisplay += myVisual.GetType().ToString() + "\r\n"
Next
MessageBox.Show(controlsToDisplay)
End Sub
D. Dim controlsToDisplay As String = String.Empty
Private Sub Window_MouseDown(ByVal sender As Object, _
ByVal e As MouseButtonEventArgs)
Dim pt As Point = e.GetPosition(Me)
VisualTreeHelper.HitTest(Me, Nothing, _
New HitTestResultCallback(AddressOf HitTestCallback), _
New PointHitTestParameters(pt))
MessageBox.Show(controlsToDisplay)
End Sub
Private Function HitTestCallback(ByVal result As HitTestResult) As _
HitTestResultBehavior
controlsToDisplay += result.VisualHit.GetType().ToString() + "\r\n"
Return HitTestResultBehavior.Continue
End Function
Answer: D

Microsoft pdf   070-502 dumps   070-502 pdf
19. You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
You write the following code segment (Line numbers are included for reference only).
01 Dim content As Object
02 Dim fileName As String = "theFile"
03 Using xamlFile As New FileStream(fileName & ".xaml", _
04 FileMode.Open, FileAccess.Read)
06 content = TryCast(XamlReader.Load(xamlFile), Object)
07 End Using
08 Using container As Package = Package.Open(fileName & ".xps", _
09 FileMode.Create)1011 End Using
You need to ensure that the following requirements are met:
The application converts an existing flow document into an XPS document.
The XPS document is generated by using the flow document format.
The XPS document has the minimum possible size.
Which code segment should you insert at line 10?
A
Using xpsDoc As New XpsDocument(container, _
CompressionOption.SuperFast)
Dim rsm As XpsSerializationManager = New _
System.Windows.Xps.XpsSerializationManager(New _
XpsPackagingPolicy(xpsDoc), False)
rsm.SaveAsXaml(paginator)
End Using
B. Using xpsDoc As New XpsDocument(container, _
CompressionOption.SuperFast)
Dim rsm As New XpsSerializationManager(New _
XpsPackagingPolicy(xpsDoc), False)
rsm.Commit()
End Using
C. Using xpsDoc As New XpsDocument(container, _
CompressionOption.Maximum)
Dim rsm As New XpsSerializationManager(New _
XpsPackagingPolicy(xpsDoc), False)
Dim paginator As DocumentPaginator = (CType(content, _
IDocumentPaginatorSource)).DocumentPaginator
rsm.SaveAsXaml(paginator)
End Using
D. Using xpsDoc As New XpsDocument(container, _
CompressionOption.SuperFast)
Dim rsm As New XpsSerializationManager(New _
XpsPackagingPolicy(xpsDoc), False)
Dim paginator As DocumentPaginator = (CType(content, _
IDocumentPaginatorSource)).DocumentPaginator
rsm.SaveAsXaml(paginator)
End Using
Answer: C

Microsoft최신덤프   070-502자료   070-502인증   070-502시험문제
20. You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
You write the following code segment (Line numbers are included for reference only).
01 Dim content As Object
02 Dim fileName As String = "theFile"
03 Using xamlFile As New FileStream(fileName & ".xaml", _
04 ?FileMode.Open, FileAccess.Read)
06 content = TryCast(XamlReader.Load(xamlFile), Object)
07 End Using
08 Using container As Package = Package.Open(fileName & ".xps", _
09 ?FileMode.Create)10 11 End Using
You need to ensure that the following requirements are met:
The application converts an existing flow document into an XPS document.
The XPS document is generated by using the flow document format.
The XPS document has the minimum possible size.
Which code segment should you insert at line 10?
A.Using xpsDoc As New XpsDocument(container, _
CompressionOption.SuperFast)
Dim rsm As XpsSerializationManager = New _
System.Windows.Xps.XpsSerializationManager(New _
XpsPackagingPolicy(xpsDoc), False)
rsm.SaveAsXaml(paginator)
End Using
B. Using xpsDoc As New XpsDocument(container, _
CompressionOption.SuperFast)
Dim rsm As New XpsSerializationManager(New _
XpsPackagingPolicy(xpsDoc), False)
rsm.Commit()
End Using
C. Using xpsDoc As New XpsDocument(container, _
CompressionOption.Maximum)
Dim rsm As New XpsSerializationManager(New _
XpsPackagingPolicy(xpsDoc), False)
Dim paginator As DocumentPaginator = (CType(content, _
IDocumentPaginatorSource)).DocumentPaginator
rsm.SaveAsXaml(paginator)
End Using
D. Using xpsDoc As New XpsDocument(container, _
CompressionOption.SuperFast)
Dim rsm As New XpsSerializationManager(New _
XpsPackagingPolicy(xpsDoc), False)
Dim paginator As DocumentPaginator = (CType(content, _
IDocumentPaginatorSource)).DocumentPaginator
rsm.SaveAsXaml(paginator)
End Using
Answer: C

Microsoft dumps   070-502 dump   070-502   070-502
21. You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
The application displays documents by using an instance of the FlowDocumentPageViewer class. The
instance is named fdpv. Users can highlight and annotate the content of the documents.
You need to ensure that annotations made to a document are saved and rendered when the document is
displayed again.
Which code segment should you use?
A.protected void OnTextInput(object sender, RoutedEventArgs e) {
AnnotationService service = AnnotationService.GetService(fdpv);
if (service == null) {
AnnotationStream = new FileStream("annotations.xml",
FileMode.Open, FileAccess.ReadWrite);
service = new AnnotationService(fdpv);
AnnotationStore store = new XmlStreamStore(AnnotationStream);
service.Enable(store);
}
}
private void OnClosing(object sender,
System.ComponentModel.CancelEventArgs e) {
AnnotationService service = AnnotationService.GetService(fdpv);
if (service != null && service.IsEnabled) {
service.Store.Flush();
service.Disable();
AnnotationStream.Close();
}
}
B. protected void OnLoaded(object sender, RoutedEventArgs e) {
AnnotationService service = AnnotationService.GetService(fdpv);
if (service == null) {
AnnotationStream = new FileStream("annotations.xml",
FileMode.Open, FileAccess.ReadWrite);
service = new AnnotationService(fdpv);
}
}
private void OnClosing(object sender,
?System.ComponentModel.CancelEventArgs e) {
AnnotationService service = AnnotationService.GetService(fdpv);
if (service != null && service.IsEnabled) {
service.Store.Flush();
service.Disable();
AnnotationStream.Close();
}
}
C. protected void OnLoaded(object sender, RoutedEventArgs e) {
AnnotationService service = AnnotationService.GetService(fdpv);
if (service == null) {
AnnotationStream = new FileStream("annotations.xml",
FileMode.Open, FileAccess.ReadWrite);
service = new AnnotationService(fdpv);
AnnotationStore store = new XmlStreamStore(AnnotationStream);
service.Enable(store);
}
}
private void OnClosing(object sender,
System.ComponentModel.CancelEventArgs e) {
AnnotationService service = AnnotationService.GetService(fdpv);
if (service != null && service.IsEnabled) {
service.Store.Flush();
service.Disable();
AnnotationStream.Close();
}
}
D. protected void OnLoaded(object sender, RoutedEventArgs e) {
AnnotationService service = AnnotationService.GetService(fdpv);
if (service == null) {
AnnotationStream = new FileStream("annotations.xml",
FileMode.Open, FileAccess.ReadWrite);
service = new AnnotationService(fdpv);
AnnotationStore store = new XmlStreamStore(AnnotationStream);
service.Enable(store);
}
}
private void OnClosing(object sender,
System.ComponentModel.CancelEventArgs e) {
AnnotationService service = AnnotationService.GetService(fdpv);
if (service != null && service.IsEnabled) {
service.Disable();
AnnotationStream.Close();
}
}
Answer: C

Microsoft   070-502   070-502 pdf   070-502 dumps
22. You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
The application will display documents by using an instance of the FlowDocumentPageViewer class. The
instance is named fdpv. Users can highlight and annotate the content of the documents.
You need to ensure that annotations made to a document are saved and rendered when the document is
displayed again.
Which code segment should you use?
A. Protected Sub OnTextInput(ByVal sender As Object, _
ByVal e As RoutedEventArgs)
Dim service As AnnotationService = _
AnnotationService.GetService(fdpv)
If service Is Nothing Then
AnnotationStream = New FileStream("annotations.xml", _
FileMode.Open, FileAccess.ReadWrite)
service = New AnnotationService(fdpv)
Dim store As AnnotationStore = _
New XmlStreamStore(AnnotationStream)
service.Enable(store)
End If
End Sub
Private Sub OnClosing(ByVal sender As Object, _
ByVal e As System.ComponentModel.CancelEventArgs)
Dim service As AnnotationService = _
AnnotationService.GetService(fdpv)
If Not service Is Nothing AndAlso service.IsEnabled Then
service.Store.Flush()
srvice.Disable()
AnnotationStream.Close()
End If
End Sub
B. Protected Sub OnLoaded(ByVal sender As Object, _
ByVal e As RoutedEventArgs)
Dim service As AnnotationService = _
AnnotationService.GetService(fdpv)
If service Is Nothing Then
AnnotationStream = New FileStream("annotations.xml", _
FileMode.Open, FileAccess.ReadWrite)
service = New AnnotationService(fdpv)
End If
End Sub
Private Sub OnClosing(ByVal sender As Object, _
ByVal e As System.ComponentModel.CancelEventArgs)
Dim service As AnnotationService = _
AnnotationService.GetService(fdpv)
If Not service Is Nothing AndAlso service.IsEnabled Then
service.Store.Flush()
service.Disable()
AnnotationStream.Close()
End If
End Sub
C. Protected Sub OnLoaded(ByVal sender As Object, _
ByVal e As RoutedEventArgs)
Dim service As AnnotationService = _
AnnotationService.GetService(fdpv)
If service Is Nothing Then
AnnotationStream = New FileStream("annotations.xml", _
FileMode.Open, FileAccess.ReadWrite)
service = New AnnotationService(fdpv)
Dim store As AnnotationStore = New _
XmlStreamStore(AnnotationStream)
service.Enable(store)
End If
End Sub
Private Sub OnClosing(ByVal sender As Object, _
ByVal e As System.ComponentModel.CancelEventArgs)
Dim service As AnnotationService = _
AnnotationService.GetService(fdpv)
If Not service Is Nothing AndAlso service.IsEnabled Then
service.Store.Flush()
service.Disable()
AnnotationStream.Close()
End If
End Sub
D. Protected Sub OnLoaded(ByVal sender As Object, _
ByVal e As RoutedEventArgs)
Dim service As AnnotationService = _
AnnotationService.GetService(fdpv)
If service Is Nothing Then
AnnotationStream = New FileStream("annotations.xml", _
FileMode.Open, FileAccess.ReadWrite)
service = New AnnotationService(fdpv)
Dim store As AnnotationStore = New _
XmlStreamStore(AnnotationStream)
service.Enable(store)
End If
End Sub
Private Sub OnClosing(ByVal sender As Object, _
ByVal e As System.ComponentModel.CancelEventArgs)
Dim service As AnnotationService = _
AnnotationService.GetService(fdpv)
If Not service Is Nothing AndAlso service.IsEnabled Then
service.Disable()
AnnotationStream.Close()
End If
End Sub
Answer: C

Microsoft인증   070-502   070-502덤프   070-502   070-502
23. You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
You plan to use the application to preview video files.
You write the following XAML code fragment.
01 <Window
01 x:Class="myClass" xmlns=
01 "http://schemas.microsoft.com/winfx/2006/xaml/presentation"
01 xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
01 Title="myWindow" Height="300" Width="300">
02 <StackPanel Background="Black">
03
04 <StackPanel HorizontalAlignment="Center"
04 Orientation="Horizontal">
05 ?<Button Name="btnPlay" Margin="10" Content="Play" />
06 </StackPanel>
07
08 </StackPanel>
09 </Window>
You need to ensure that the application plays only the first 10 seconds of a video that you want to preview.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Insert the following XAML fragment at line 03.
<MediaElement Name="myMediaElement" Stretch="Fill" />
B. Insert the following XAML fragment at line 03.
<MediaElement Name="myMediaElement"
Source="MediaFileSelected.wmv" Stretch="Fill" />
C. Create the following method in the code-behind file.
public void PlayMedia(object sender, RoutedEventArgs args) {
myMediaElement.Play();
}
D. Insert the following XAML fragment at line 07.
<StackPanel.Triggers>
<EventTrigger RoutedEvent="Button.Click" SourceName="btnPlay">
<EventTrigger.Actions>
<BeginStoryboard Name= "myBegin">
<Storyboard SlipBehavior="Slip">
<MediaTimeline Source="MediaFileSelected.wmv"
Storyboard.TargetName="myMediaElement"
BeginTime="0:0:0" Duration="0:0:10" />
</Storyboard>
</BeginStoryboard>
</EventTrigger.Actions>
</EventTrigger>
</StackPanel.Triggers>
E. Insert the following XAML fragment at line 07.
<StackPanel.Triggers>
<EventTrigger RoutedEvent="Button.Click" SourceName="btnPlay">
<EventTrigger.Actions>
<BeginStoryboard Name= "myBegin">
<Storyboard SlipBehavior="Slip">
<MediaTimeline
Storyboard.TargetName="myMediaElement"
BeginTime="0:0:0" Duration="0:0:10" />
</Storyboard>
</BeginStoryboard>
</EventTrigger.Actions>
</EventTrigger>
</StackPanel.Triggers>
Answer: A AND D

Microsoft기출문제   070-502시험문제   070-502덤프   070-502
24. You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
You plan to use the application to preview video files.
You write the following XAML code fragment.
01 <Window
01 x:Class="myClass" xmlns=
01 "http://schemas.microsoft.com/winfx/2006/xaml/presentation"
01 xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
01 Title="myWindow" Height="300" Width="300">
02 <StackPanel Background="Black">
03
04 <StackPanel HorizontalAlignment="Center"
04 Orientation="Horizontal">
05 ?<Button Name="btnPlay" Margin="10" Content="Play" />
06 </StackPanel>
07
08 </StackPanel>
09 </Window>
You need to ensure that the application plays only the first 10 seconds of a video that you want to preview.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Insert the following XAML fragment at line 03.
<MediaElement Name="myMediaElement" Stretch="Fill" />
B. Insert the following XAML fragment at line 03.
<MediaElement Name="myMediaElement"
Source="MediaFileSelected.wmv" Stretch="Fill" />
C. Create the following method in the code-behind file.
Public Sub PlayMedia(ByVal sender As Object, _
ByVal args As RoutedEventArgs)
myMediaElement.Play()
End Sub
D. Insert the following XAML fragment at line 07.
<StackPanel.Triggers>
<EventTrigger RoutedEvent="Button.Click" SourceName="btnPlay">
<EventTrigger.Actions>
<BeginStoryboard Name= "myBegin">
<Storyboard SlipBehavior="Slip">
<MediaTimeline Source="MediaFileSelected.wmv"
Storyboard.TargetName="myMediaElement"
BeginTime="0:0:0" Duration="0:0:10" />
</Storyboard>
</BeginStoryboard>
</EventTrigger.Actions>
</EventTrigger>
</StackPanel.Triggers>
E. Insert the following XAML fragment at line 07.
<StackPanel.Triggers>
<EventTrigger RoutedEvent="Button.Click" SourceName="btnPlay">
<EventTrigger.Actions>
<BeginStoryboard Name= "myBegin">
<Storyboard SlipBehavior="Slip">
<MediaTimeline
Storyboard.TargetName="myMediaElement"
BeginTime="0:0:0" Duration="0:0:10" />
</Storyboard>
</BeginStoryboard>
</EventTrigger.Actions>
</EventTrigger>
</StackPanel.Triggers>
Answer: A AND D

Microsoft   070-502기출문제   070-502   070-502   070-502
25. You are creating a Windows Presentation Foundation application.
You create a window for the application. The application contains an audio file named
AudioFileToPlay.wav.
You need to ensure that the audio file is played each time you click the client area of the window.
What should you do?
A. Add the following XAML line of code to the window.
<MediaElement Source="AudioFileToPlay.wav" />
B. Add the following code segment to the window constructor method in the code-behind file.
SoundPlayer player = new SoundPlayer();
player.SoundLocation = "AudioFileToPlay.wav";
player.Play();
C. Add the following code segment to the window MouseDown method in the code-behind file.
MediaPlayer player = new MediaPlayer();
player.SetValue(MediaElement.SourceProperty,new Uri("AudioFileToPlay.wav", UriKind.Relative));
player.Play();
D. Add the following XAML code fragment to the window.
<Window.Triggers>
<EventTrigger RoutedEvent="Window.MouseDown">
<EventTrigger.Actions>
<SoundPlayerAction Source="AudioFileToPlay.wav"/>
</EventTrigger.Actions>
</EventTrigger>
</Window.Triggers>
Answer: D

Microsoft자료   070-502   070-502덤프   070-502인증
26. You are creating a Windows Presentation Foundation application.
You create a window for the application. The application contains an audio file named
AudioFileToPlay.wav.
You need to ensure that the following requirements are met:
The audio file is played each time you click the client area of the window.
The window provides optimal performance when the audio file is being played.
What should you do?
A
Add the following XAML line of code to the window.
<MediaElement Source="AudioFileToPlay.wav" />
B. Add the following code segment to the window constructor method in the code-behind file.
Dim player As New SoundPlayer()
player.SoundLocation = "AudioFileToPlay.wav"
player.Play()
C. Add the following code segment to the window MouseDown method in the code-behind file.
Dim player As New MediaElement()
player.Source = New Uri("AudioFileToPlay.wav", UriKind.Relative)
player.LoadedBehavior = MediaState.Manual
player.Play()
D. Add the following XAML code fragment to the window.
<Window.Triggers>
<EventTrigger RoutedEvent="Window.MouseDown">
<EventTrigger.Actions>
<SoundPlayerAction Source="AudioFileToPlay.wav"/>
</EventTrigger.Actions>
</EventTrigger>
</Window.Triggers>
Answer: D

Microsoft   070-502   070-502 dump   070-502덤프
27. You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5. Your project contains a folder named Data.
You add an MP3 file named song.mp3 in the Data folder. You set the Build Action property of the MP3 file
to Resource.
You need to access the MP3 file from the application.
Which code segment should you use?
A. Uri uri = new Uri("/Data/song.mp3", UriKind.Relative);
StreamResourceInfo sri=Application.GetContentStream(uri);
Stream stream=sri.Stream;
B. Uri uri = new Uri("/Data/song.mp3", UriKind.Relative);
StreamResourceInfo sri=Application.LoadComponent(uri);
Stream stream=sri.Stream;
C. Uri uri = new Uri("/Data/song.mp3", UriKind.Relative);
StreamResourceInfo sri=Application.GetRemoteStream(uri);
Stream stream=sri.Stream;
D. Uri uri = new Uri("/Data/song.mp3", UriKind.Relative);
StreamResourceInfo sri=Application.GetResourceStream(uri);
Stream stream=sri.Stream;
Answer: D

Microsoft   070-502인증   070-502 pdf   070-502 pdf
28. You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5. Your project contains a folder named Data.
You add a .MP3 file named song.mp3 in the Data folder. You set the Build Action property of the
application to Resource.
You need to access the .MP3 file from one of the application classes.
Which code segment should you use?
A. Dim uri As New Uri("/Data/song.mp3", UriKind.Relative)
Dim sri As StreamResourceInfo = Application.GetContentStream(uri)
Dim stream As Stream = sri.Stream
B. Dim uri As New Uri("/Data/song.mp3", UriKind.Relative)
Dim sri As StreamResourceInfo = Application.LoadComponent(uri)
Dim stream As Stream = sri.Stream
C. Dim uri As New Uri("/Data/song.mp3", UriKind.Relative)
Dim sri As StreamResourceInfo = Application.GetRemoteStream(uri)
Dim stream As Stream = sri.Stream
D. Dim uri As New Uri("/Data/song.mp3", UriKind.Relative)
Dim sri As StreamResourceInfo = Application.GetResourceStream(uri)
Dim stream As Stream = sri.Stream
Answer: D

Microsoft dump   070-502   070-502자격증   070-502   070-502최신덤프   070-502
29. You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
The application has a window that programatically displays an image. The window contains a grid named
theGrid.
The window displays images in their actual size of 1024 pixels wide or larger. You want the images to be
200 pixels wide.
You write the following code segment. (Line numbers are included for reference only.)
01 Image theImage=new Image();
02 theImage.Width=200;
03 BitmapImage theBitmapImage=new BitmapImage();
04
05 theImage.Source=theBitmapImage;
06 theGrid.Children.Add(theImage);
You need to ensure that the application meets the following requirements:
The window uses the least amount of memory to display the image.
The image is not skewed.
Which code segment should you insert at line 04?
A. theBitmapImage.UriSource=new Uri(@"imageToDisplay.jpg");
theBitmapImage.DecodePixelWidth=200;
B. theBitmapImage.BeginInit();
theBitmapImage.UriSource=new Uri(@"imageToDisplay.jpg");
theBitmapImage.EndInit();
C. theBitmapImage.BeginInit();
theBitmapImage.UriSource=new Uri(@"imageToDisplay.jpg");
theBitmapImage.DecodePixelWidth=200;
theBitmapImage.EndInit();
D. theBitmapImage.BeginInit();
theBitmapImage.UriSource=new Uri(@"imageToDisplay.jpg");
theBitmapImage.DecodePixelWidth=200;
theBitmapImage.DecodePixelHeight=200;
theBitmapImage.EndInit();
Answer: C

Microsoft   070-502   070-502인증
30. You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
The application has a window that programatically displays an image. The window contains a grid named
theGrid.
The window displays images in their actual size. You want the images to be 200 pixels wide. You write the
following code segment.
01 Dim theImage As New Image()
02 theImage.Width = 200
03 Dim theBitmapImage As New BitmapImage()
04
05 theImage.Source = theBitmapImage
06 theGrid.Children.Add(theImage)
You need to ensure that the application meets the following requirements:
The window uses the least amount of memory to display the image.
The image is not skewed.
Which code segment should you insert at line 04?
A. theBitmapImage.UriSource = New Uri("imageToDisplay.jpg")
theBitmapImage.DecodePixelWidth = 200
B. theBitmapImage.BeginInit()
theBitmapImage.UriSource = New Uri("imageToDisplay.jpg")
theBitmapImage.EndInit()
C. theBitmapImage.BeginInit()
theBitmapImage.UriSource = New Uri("imageToDisplay.jpg")
theBitmapImage.DecodePixelWidth = 200
theBitmapImage.EndInit()
D. theBitmapImage.BeginInit()
theBitmapImage.UriSource = New Uri("imageToDisplay.jpg")
theBitmapImage.EndInit()
theBitmapImage.DecodePixelWidth = 200
theBitmapImage.DecodePixelHeight = 200
Answer: C

Microsoft   070-502최신덤프   070-502최신덤프   070-502기출문제   070-502   070-502

NO.3 5.
You add a CommandBinding element to the Window element. The command has a keyboard gesture
CTRL+H. The Window contains the following MenuItem control.
<MenuItem Header="Highlight Content"
Command="local:CustomCommands.Highlight" />
You need to ensure that the MenuItem control is disabled and the command is not executable when the
focus shifts to a TextBox control that does not contain any text.
What should you do?
A. Set the IsEnabled property for the MenuItem control in the GotFocus event handler for the TextBox
controls.
B. Set the CanExecute property of the command to Highlight_CanExecute.
Add the following method to the code-behind file for the window.
Private Sub Highlight_CanExecute(ByVal sender As Object, _
ByVal e As CanExecuteRoutedEventArgs)
Dim txtBox As TextBox = CType(sender, TextBox)
e.CanExecute = (txtBox.Text.Length > 0)
End Sub
C. Set the CanExecute property of the command to Highlight_CanExecute.
Add the following method to the code-behind file for the window.
Private Sub Highlight_CanExecute(ByVal sender As Object, _
ByVal e As CanExecuteRoutedEventArgs)
Dim txtBox As TextBox
txtBox = CType(e.Source, TextBox)
e.CanExecute = (txtBox.Text.Length > 0)
End Sub
D. Set the CanExecute property of the command to Highlight_CanExecute.
Add the following method to the code-behind file for the window.
Private Sub Highlight_CanExecute(ByVal sender As Object, _
?ByVal e As CanExecuteRoutedEventArgs)
Dim Menu As MenuItem = CType(e.Source, MenuItem)
Dim txtBox As TextBox = CType(Menu.CommandTarget, TextBox)
Menu.IsEnabled = (txtBox.Text.Length > 0)
End Sub
Answer: C

Microsoft기출문제   070-502   070-502 dumps
3. You create a Windows Presentation Foundation application by using Microsoft .NET Framework 3.5.
The application is named EnterpriseApplication.exe.
You add the WindowSize parameter and the WindowPosition parameter to the Settings.settings file by
using the designer at the User Scope Level. The dimensions and position of the window are read from the
user configuration file.
The application must retain the original window size and position for each user who executes the
application.
You need to ensure that the following requirements are met:
?The window dimensions for each user are saved in the user configuration file.
?The user settings persist when a user exits the application.
Which configuration setting should you use?
A. private void OnClosing(object sender,
System.ComponentModel.CancelEventArgs e){
Settings.Default.WindowPosition = new Point (this.Left,
this.Top);
Settings.Default.WindowSize = new Size (this.Width,
this.Height);
Settings.Default.Save();
B. private void OnClosing(object sender,
System.ComponentModel.CancelEventArgs e){
RegistryKey appKey =
Registry.CurrentUser.CreateSubKey("Software\\EnterpriseApplication");
RegistryKey settingsKey = appKey.CreateSubKey("WindowSettings");
RegistryKey windowPositionKey =
settingsKey.CreateSubKey("WindowPosition");
RegistryKey windowSizeKey = settingsKey.CreateSubKey("WindowSize");
windowPositionKey.SetValue("X", this.Left);
windowPositionKey.SetValue("Y", this.Top);
windowSizeKey.SetValue("Width", this.Width);
windowSizeKey.SetValue("Height", this.Height);
C. private void OnClosing(object sender,
System.ComponentModel.CancelEventArgs e){
XmlDocument doc = new XmlDocument();
doc.Load("EnterpriseApplication.exe.config");
XmlNode nodePosition =
doc.SelectSingleNode("//setting[@name=\'WindowPosition\']");
nodePosition.ChildNodes[0].InnerText = String.Format("{0},{1}",
this.Left, this.Top);
XmlNode nodeSize =
doc.SelectSingleNode("//setting[@name=\'WindowSize\']");
nodeSize.ChildNodes[0].InnerText = String.Format("{0},{1}",
this.Width, this.Height);
doc.Save("UserConfigDistractor2.exe.config");
D. private void Window_Closing(object sender,
System.ComponentModel.CancelEventArgs e){
StreamWriter sw =
new StreamWriter("EnterpriseApplication.exe.config", true);
sw.WriteLine("<EnterpriseApplication.Properties.Settings>");
sw.WriteLine("<setting name=
\"WindowSize\" serializeAs=\"String\">");
sw.WriteLine(String.Format("<value>{0},{1}</value>",
this.Width, this.Height));
sw.WriteLine("</setting>");
sw.WriteLine("<setting name=
\"WindowPosition\" serializeAs=\"String\">");
sw.WriteLine(String.Format("<value>{0},{1}</value>", this.Left,
this.Top));
sw.WriteLine("</setting>");
sw.WriteLine("</UserConfigProblem.Properties.Settings>");
sw.Close();
Answer: A

Microsoft   070-502   070-502   070-502

NO.4 You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
The application defines a BrowserWindow class. Each instance of the BrowserWindow class allows the
user to browse a Web site in a separate window. When a new browser window is opened, the user is
redirected to a predefined URL.
You write the following code segment.
01 private void OpenNewWindow(object sender, RoutedEventArgs e)
02 {
03 Thread newWindowThread = new Thread(new
ThreadStart(NewThreadProc));
04
05 newWindowThread.Start();
06 }
07 private void NewThreadProc()
08 {
09 10 ?}
You need to ensure that the following requirements are met:
?The main window of the application is not blocked when an additional browser window is created.
?The application completes execution when the main window of the application is closed.
What should you do?
A. Insert the following code segment at line 04.
newWindowThread.SetApartmentState(ApartmentState.STA);
newWindowThread.IsBackground = true;
Insert the following code segment at line 09.
BrowserWindow newWindow = new BrowserWindow();
newWindow.Show();
Application app = new Application();
app.Run(newWindow);
B. Insert the following code segment at line 04.
newWindowThread.IsBackground = true;
Insert the following code segment at line 09.
newWindowThread.SetApartmentState(ApartmentState.STA);
BrowserWindow newWindow = new BrowserWindow();
newWindow.Show();
Application app = new Application();
app.Run(newWindow);
C. Insert the following code segment at line 04.
newWindowThread.SetApartmentState(ApartmentState.STA);
newWindowThread.IsBackground = false;
Insert the following code segment at line 09.
BrowserWindow newWindow = new BrowserWindow();
System.Windows.Threading.Dispatcher.Run();
newWindow.Show();
D. Insert the following code segment at line 04.
newWindowThread.SetApartmentState(ApartmentState.STA);
newWindowThread.IsBackground = true;
Insert the following code segment at line 09.
BrowserWindow newWindow = new BrowserWindow();
newWindow.Show();
System.Windows.Threading.Dispatcher.Run();
Answer: D

Microsoft   070-502   070-502 pdf   070-502 dumps

NO.5 You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
You add a CommandBinding element to the Window element. The command has a keyboard gesture
CTRL+H. The Window contains the following MenuItem control.
<MenuItem Header="Highlight Content"
Command="local:CustomCommands.Highlight" />
You need to ensure that the MenuItem control is disabled and the command is not executable when the
focus shifts to a TextBox control that does not contain any text.
What should you do?
A. Set the IsEnabled property for the MenuItem control in the GotFocus event handler for the TextBox
controls.
B. Set the CanExecute property of the command to Highlight_CanExecute.
Add the following method to the code-behind file for the window.
private void Highlight_CanExecute(object sender, CanExecuteEventArgs e) {
TextBox txtBox = sender as TextBox;
e.CanExecute = (txtBox.Text.Length > 0);
}
C. Set the CanExecute property of the command to Highlight_CanExecute.
Add the following method to the code behind file for the window.
private void Highlight_CanExecute(object sender, CanExecuteEventArgs e) {
TextBox txtBox = e.Source as TextBox;
e.CanExecute = (txtBox.Text.Length > 0);
}
D. Set the CanExecute property of the command to Highlight_CanExecute.
Add the following method to the code behind file for the window.
private void Highlight_CanExecute(object sender, CanExecuteEventArgs e) {
MenuItem menu = e.Source as MenuItem;
TextBox txtBox = menu.CommandTarget as TextBox;
Menu.IsEnabled = (txtBox.Text.Length > 0);
}
Answer: C

Microsoft   070-502시험문제   070-502   070-502 dumps

NO.6 You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework

070-502인증시험패스는 쉬운 일은 아닙니다. 높은 전문지식은 필수입니다.하지만 자신은 이 방면 지식이 없다면 ITExamDump가 도움을 드릴 수 있습니다. ITExamDump의 전문가들이 자기만의 지식과 지금까지의 경험으로 최고의 IT인증관련자료를 만들어 여러분들의 고민을 해결해드릴 수 있습니다. 우리는 최고의070-502인증시험문제와 답을 제공합니다. ITExamDump는 최선을 다하여 여러분이 한번에070-502인증시험을 패스하도록 도와드릴 것입니다. 여러분은 우리 ITExamDump 선택함으로 일석이조의 이익을 누릴 수 있습니다. 첫쨰는 관여지식은 아주 알차게 공부하실 수 있습니다.둘째는 바로 시험을 안전하게 한번에 통과하실 수 있다는 거죠.그리고 우리는 일년무료 업데이트서비스를 제공합니다.덤프가 업뎃이되면 우리는 모두 무료로 보내드립니다.만약 시험에서 실패한다면 우리 또한 덤프비용전액을 환불해 드립니다.