EMC E20-816 덤프자료

ITExamDump 에서는 최선을 다해 여러분이EMC E20-816인증시험을 패스하도록 도울 것이며 여러분은 ITExamDump에서EMC E20-816덤프의 일부분의 문제와 답을 무료로 다운받으실 수 잇습니다. ITExamDump 선택함으로EMC E20-816인증시험통과는 물론ITExamDump 제공하는 일년무료 업데이트서비스를 제공받을 수 있으며 ITExamDump의 인증덤프로 시험에서 떨어졌다면 100% 덤프비용 전액환불을 약속 드립니다.

우리ITExamDump 에서 여러분은 아주 간단히EMC E20-816시험을 패스할 수 있습니다. 만약 처음EMC E20-816시험에 도전한다면 우리의EMC E20-816시험자료를 선택하여 다운받고 고부를 한다면 생가보다는 아주 쉽게EMC E20-816시험을 통과할 수 있으며 무엇보다도 시험시의 자신감 충만에 많은 도움이 됩니다. 다른 자료판매사이트도 많겠지만 저희는 저희 자료에 자신이 있습니다. 우리의 시험자료는 모두 하이퀼러티한 문제와 답으로 구성되었습니다, 그리고 우리는 업데트를 아주 중요시 생각하기에 어느 사이트보다 더 최신버전을 보실 수 잇을것입니다. 우리의EMC E20-816자료로 자신만만한 시험 준비하시기를 바랍니다. 우리를 선택함으로 자신의 시간을 아끼는 셈이라고 생각하시면 됩니다.EMC E20-816로 빠른시일내에 자격증 취득하시고EMCIT업계중에 엘리트한 전문가되시기를 바랍니다.

시험 번호/코드: E20-816
시험 이름: EMC (Symmetrix Solutions Expert Exam for Technology Architects)

최근 EMC인증 E20-816시험이 IT업계에서 제일 높은 인지도를 가지고 있습니다.바라만 보지 마시고EMC인증 E20-816시험에 도전해보세요. ITExamDump 의 EMC인증 E20-816덤프로 시험준비공부를 하시면 한방에 시험패스 가능합니다. EMC인증 E20-816덤프로 자격증취득에 가까워지고 나아가서는 IT업계에서 인정을 받는 열쇠를 소유한것과 같다고 할수 있습니다.

E20-816인증시험은EMC사의 인중시험입니다.EMC인증사의 시험을 패스한다면 it업계에서의 대우는 달라집니다. 때문에 점점 많은 분들이EMC인증E20-816시험을 응시합니다.하지만 실질적으로E20-816시험을 패스하시는 분들은 너무 적습니다.전분적인 지식을 터득하면서 완벽한 준비하고 응시하기에는 너무 많은 시간이 필요합니다.하지만 우리ITExamDump는 이러한 여러분의 시간을 절약해드립니다.

ITExamDump에서 제공하는 제품들은 품질이 아주 좋으며 또 업뎃속도도 아주 빠릅니다 만약 우리가제공하는EMC E20-816인증시험관련 덤프를 구매하신다면EMC E20-816시험은 손쉽게 성공적으로 패스하실 수 있습니다.

ITExamDump의EMC E20-816시험자료의 문제와 답이 실제시험의 문제와 답과 아주 비슷합니다. 우리의 짧은 학습가이드로 빠른 시일 내에 관련지식을 터득하여 응시준비를 하게 합니다. 우리는 우리의EMC E20-816인증시험덤프로 시험패스를 보장합니다.

E20-816 덤프무료샘플다운로드하기: http://www.itexamdump.com/E20-816.html

NO.1 A company has a Symmetrix V-Max array in an open systems environment. They want to use
TimeFinder/Snap to create a single copy per day of a production environment containing 200 volumes of
8 GB each. Twenty-five percent of the total I/O in the application is write activity.
What is the amount of physical storage required for all VDEVs?
A. 50 GB
B. 4 GB
C. 8 GB
D. 0 GB
Answer: D

EMC시험문제   E20-816최신덤프   E20-816최신덤프   E20-816최신덤프   E20-816 pdf

NO.2 A customer is migrating their Windows 2008 servers from HP storage to EMC V-Max storage.
Host-based performance metrics need to be used to design a configuration. EMC recommends the
diskperf -Y command to enable I/O statics in every server.
Why is enabling disk statistics collection recommended?
A. It improves performance of the servers
B. Otherwise, a reboot will be required to activate
C. Otherwise, you must start Performance Monitor
D. Because Windows 2008 leaves the default value to off
Answer: B

EMC dump   E20-816기출문제   E20-816   E20-816   E20-816   E20-816

NO.3 The customer wants to replace the three DMX 2000s with a single Symmetrix V-Max using Open
Replicator hot pull for the move. What sequence of steps should be taken to get ready for the copy
sessions?
LUN Masking of DMX 2000 remote volumes to the V-Max FA ports.
V-Max and DMX 2000 arrays are reachable via the same fabric or SAN extension.
FA ports of V-Max are zoned to FA ports of the three DMX 2000s.
V-Max and DMX 2000 arrays are reachable via point-to-point or FC-AL.
LUN Masking of the V-Max control volumes to the DMX 2000 FA ports.
All V-Max FAs have access to the DMX 2000 volumes being migrated.
A. 4,6,1,3
B. 4,3,5,6
C. 2,3,1,6
D. 2,3,5,6
Answer: C

EMC pdf   E20-816   E20-816자료   E20-816시험문제

NO.4 Click the Calculator icon in the upper left-hand corner.
SRDF/S over Fibre Channel has been configured between two V-Max arrays that are 50 kilometers apart.
What is the expected write response time delay due to latency?
A. 0.25 ms
B. 0.5 ms
C. 1 ms
D. 2 ms
Answer: C

EMC   E20-816   E20-816   E20-816

NO.5 The customer wants a TimeFinder/Snap solution to create a point in time prior to modifying the source
data for testing purposes with a 16-hour RPO.
How should the Change Tracker data collection be set up to model the solution.?
A. Delta report with a reset of 8 hours
B. Delta report with a reset of 16 hours
C. Delta report with a reset of 4 hours
D. Sum report with a reset of 8 hours
Answer: B

EMC dump   E20-816자격증   E20-816덤프   E20-816자격증   E20-816

NO.6 The customer has a DMX-4 replicating to another DMX-4 (microcode level 5773 for both) over an
SRDF/S session between two sites 20 km apart and wants to understand the limitation (if any) of using
the Single Round Trip (SiRT) feature on RF directors. What is the applicable limitation of the setup?
A. SiRT only works for an I/O size of less than 32 KB.
B. SiRT is enabled for all block sizes.
C. SiRT would not work because the distance is greater than 12 km.
D. SiRT only works for SRDF/A.
Answer: A

EMC   E20-816   E20-816인증

NO.7 A customer is planning to implement SRDF/S into their environment. The customer wants zero data
loss if they lose their primary data center (R1). The distance is 1,000 miles, and the customer would like to
maintain an application response time of 10 ms.
Which design would you implement?
A. SRDF/AR single-hop
B. SRDF/AR multi-hop
C. SRDF/DM
D. SRDF/S with adaptive copy initially
Answer: B

EMC   E20-816자격증   E20-816자료

NO.8 A customer wants to migrate from DMX-3 with 5772 to DMX-4 with 5773 code. They are using
TimeFinder/Clone every night for backup processing with synchronous COFW. TimeFinder/Clone with
5773 allows them to use a new feature called asynchronous COFW.
How many back-end operations does TimeFinder/Clone make with Enginuity 5773 using Aynchronous
COFW compared with TimeFinder/Clone with Enginuity 5772?
A. Back-end operations are lower with 5773 Enginuity.
B. Back-end operations are the same in both Enginuity versions.
C. Back-end operations are higher with 5773 Enginuity.
D. Depends on disk speed and RAID protection.
Answer: B

EMC dump   E20-816자격증   E20-816자격증   E20-816 dump   E20-816 pdf

NO.9 A customer is implementing a new SRDF/S environment with DMX arrays. The primary and secondary
data centers are 20 kilometers apart.
Which consideration is needed for planning, designing, and implementing a synchronous solution?
A. Ensure that the application can tolerate the additional latency
B. Ensure that adequate cache on the arrays is allocated
C. Ensure that the RAID configuration is identical on both arrays
D. Ensure that there is twice the recommended amount of bandwidth
Answer: A

EMC   E20-816시험문제   E20-816자격증   E20-816

NO.10 What are the key differences between SIRT in 5772 and SIRT in Symmetrix V-Max with 5874?
A. SIRT in 5874 is enabled for all write sizes or if RTT > 115 microsec
B. SIRT in 5874 is enabled for write sizes up to 64 KB or RTT threshold > 520 microsec
C. SIRT in 5874 is enabled for all write sizes or if RTT < 115 microsec
D. SIRT in 5874 is enabled for write sizes up to 128 KB or if RTT < 115 microsec
Answer: A

EMC기출문제   E20-816   E20-816덤프   E20-816최신덤프   E20-816

NO.11 A customer is running SRDF/A single session mode. They want to change into SRDF/S mode after
nightly periods of high write activity have completed. The switch to synchronous mode failed.
What is a potential cause for this failure?
A. SRDF/S cycle switching feature is not enabled.
B. Mode change feature is only supported with Concurrent SRDF.
C. SDRF/A write cache is not enabled at the remote site.
D. Fifty percent or more of SRDF/A write cache is in use on the target Symmetrix.
Answer: D

EMC   E20-816 dump   E20-816인증

NO.12 The customer wants a TimeFinder/Snap solution to create a point in time prior to modifying the source
data for testing purposes. The snap would be kept for 8 hours. How should the Change Tracker data
collection be set up to model the solution?
A. Sum report with a reset of 4 hours
B. Delta report with a reset of 16 hours
C. Delta report with a reset of 4 hours
D. Delta report with a reset of 8 hours
Answer: D

EMC기출문제   E20-816   E20-816

NO.13 A customer's application is stored on a DMX-4. The application runs 24x7x365. They would like to send
consistent replicas of this data simultaneously to four branch offices on a nightly basis. The branch offices
have CLARiiON arrays.
Which solution would you recommend?
A. Use TimeFinder/Mirror to create a consistent replica of the production application. Then use Open
Replicator cold push to replicate the data from the BCVs to the remote offices.
B. Use Open Replicator cold push to replicate the data to the remote offices.
C. Use Open Replicator hot push to replicate the data to the remote offices.
D. Use TimeFinder/Snap to create a consistent replica of the production application. Then use Open
Replicator cold push to replicate the data on the VDEVs to the remote offices.
Answer: A

EMC   E20-816   E20-816인증   E20-816최신덤프   E20-816

NO.14 An Open Replicator data migration from a HDS to Symmetrix array is being proposed. The customer
has the following requirements: Application downtime should be minimal and Open Replicator session
failure must not result in data loss
Which solution will meet the customer's requirements?
A. Cold pull with precopy
B. Cold pull with donor update
C. Hot pull with donor update
D. Hot pull with precopy
Answer: C

EMC dumps   E20-816시험문제   E20-816

NO.15 A customer has a single V-Max and you are helping to design a new SRDF solution. This customer
wants to replicate all its data with SRDF over a Gigabit Ethernet.
In order to get the maximum benefit from scaling, what is the most important consideration?
A. All GigE ports on the source should be able to see all GigE ports on the target array
B. Ports must have auto-negotiation off because we don't support Jumbo Frames
C. Speed limit value in the Symmetrix configuration file (not persistent)
D. Speed limits can be set on GigE ports from 100 to 10000 Mb (megabits)
Answer: A

EMC인증   E20-816   E20-816   E20-816자료   E20-816최신덤프

IT업계에서 자신만의 위치를 찾으려면 자격증을 많이 취득하는것이 큰 도움이 될것입니다. EMC 인증 E20-816시험은 아주 유용한 시험입니다. EMC 인증E20-816시험출제경향을 퍼펙트하게 연구하여ITExamDump에서는EMC 인증E20-816시험대비덤프를 출시하였습니다. ITExamDump에서 제공해드리는EMC 인증E20-816시험덤프는 시장에서 판매하고 있는EMC 인증E20-816덤프중 가장 최신버전덤프로서 덤프에 있는 문제만 공부하시면 시험통과가 쉬워집니다.