Microsoft 인증 070-595시험이 너무 어려워서 시험 볼 엄두도 나지 않는다구요? ITExamDump 덤프만 공부하신다면 IT인증시험공부고민은 이젠 그만 하셔도 됩니다. ITExamDump에서 제공해드리는Microsoft 인증 070-595시험대비 덤프는 덤프제공사이트에서 가장 최신버전이여서 시험패스는 한방에 갑니다. Microsoft 인증 070-595시험뿐만 아니라 IT인증시험에 관한 모든 시험에 대비한 덤프를 제공해드립니다. 많은 애용 바랍니다.
ITExamDump는 많은 분들이 IT인증시험을 응시하여 성공하도록 도와주는 사이트입니다. ITExamDump 의 덤프는 모두 엘리트한 전문가들이 만들어낸 만큼 시험문제의 적중률은 아주 높습니다. 거의 100%의 정확도를 자랑하고 있습니다. 아마 많은 유사한 사이트들도 많습니다. 이러한 사이트에서 학습가이드와 온라인서비스도 지원되고 있습니다만 ITExamDump 는 이미 이러한 사이트를 뛰어넘은 실력으로 업계에서 우리만의 이미지를 지키고 있습니다. ITExamDump 는 정확한 문제와 답만 제공하고 또한 그 어느 사이트보다도 빠른 업데이트로 여러분의 인증시험을 안전하게 패스하도록 합니다.
지금 같은 세대에 많은 분들이 IT업계에 관심을 가지고 있습니다. 이렇게 인재가 많은 사회에서 IT관련인사들은 아직도 적은 편입니다. 면접 시에도 IT인증 자격증유무를 많이들 봅니다. 때문에 IT자격증이 많은 인기를 누리고 있습니다.이런 살아가기 힘든 사회에서 이런 자격증들 또한 취득하기가 넘 어렵습니다.Microsoft MB7-848인증시험 또한 아주 어려운 시험입니다. 많은 분들이 응시하지만 통과하는 분들은 아주 적습니다.
많은 사이트에서도 무료Microsoft 070-595덤프데모를 제공합니다. 우리도 마찬가지입니다. 여러분은 그러한Microsoft 070-595데모들을 보시고 다시 우리의 덤프와 비교하시면, 우리의 덤프는 다른 사이트덤프와 차원이 다른 덤프임을 아사될 것 입니다. 우리 ITExamDump사이트에서 제공되는Microsoft인증070-595시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보면 우리ITExamDump에 믿음이 갈 것입니다. 왜냐면 우리 ITExamDump에는 베터랑의 전문가들로 이루어진 연구팀이 잇습니다, 그들은 it지식과 풍부한 경험으로 여러 가지 여러분이Microsoft인증070-595시험을 패스할 수 있을 자료 등을 만들었습니다 여러분이Microsoft인증070-595시험에 많은 도움이Microsoft 070-595될 것입니다. ITExamDump 가 제공하는070-595테스트버전과 문제집은 모두Microsoft 070-595인증시험에 대하여 충분한 연구 끝에 만든 것이기에 무조건 한번에Microsoft 070-595시험을 패스하실 수 있습니다. 때문에Microsoft 070-595덤프의 인기는 당연히 짱 입니다.
시험 이름: TS: Developing Business Process and Integration Solutions by Using Microsoft BizTalk Server 2010
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 070-595자격증시험자료
100% 합격율 보장
Q&A: 57 문항 070-595시험
업데이트: 2014-05-21
070-595자격증시험자료: >>펼쳐보기
시험 이름: UPG:Trans MCPD.NET Frmwk 3.5 Dev Skil to .NET 4 Wndws App De
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 070-521-VB자격증시험자료
100% 합격율 보장
Q&A: 115 문항 070-521-VB자격시험
업데이트: 2014-05-21
070-521-VB자격증시험자료: >>펼쳐보기
시험 이름: NAV 2009 Service Management
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 MB7-848시험문제
100% 합격율 보장
Q&A: 50 문항 MB7-848자격증
업데이트: 2014-05-21
MB7-848시험문제: >>펼쳐보기
ITExamDump는ITExamDump의Microsoft인증 070-595덤프자료를 공부하면 한방에 시험패스하는것을 굳게 약속드립니다. ITExamDump의Microsoft인증 070-595덤프로 공부하여 시험불합격받으면 바로 덤프비용전액 환불처리해드리는 서비스를 제공해드리기에 아무런 무담없는 시험준비공부를 할수 있습니다.
070-521-VB 덤프무료샘플다운로드하기: http://www.itexamdump.com/070-521-VB.html
NO.1 A Windows Communication Foundation (WCF) application uses a data contract that has several data
members.
You need the application to throw a SerializationException if any of the data members are not present
when a serialized instance of the data contract is deserialized.
What should you do?
A. Add the KnownType attribute to the data contract. Set a default value in each of the data member
declarations.
B. Add the KnownType attribute to the data contract. Set the Order property of each data member to
unique integer value.
C. Set the EmitDefaultValue property of each data member to False.
D. Set the IsRequired property of each data member to True.
Answer: D
Microsoft교육 070-521-VB자격증 070-521-VB교재
NO.2 A WCF service code is implemented as follows. (Line numbers are included for reference only.)
01 <ServiceContract()>
02 <ServiceBehavior(
03 InstanceContextMode:=InstanceContextMode.Single)>
04 Public Class CalculatorService
05
06 <OperationContract()>
07 Public Function Calculate(ByVal op1 As Double,
08 ByVal op As String, ByVal op2 As Double) As Double
24 End Function
25
26 End Class
You need to decrease the response time of the service.
What are two possible ways to achieve this goal? (Each correct answer presents a complete solution.
Choose two.)
A. Change the service behavior to the following.
<ServiceBehavior(
InstanceContextMode:=InstanceContextMode.Single,
ConcurrencyMode:=ConcurrencyMode.Multiple)>
B. Change the service behavior to the following.
<ServiceBehavior(InstanceContextMode:=InstanceContextMode.PerCall)>
C. Require the clients use threads, the Parallel Task Library, or other mechanism to issue service calls in
parallel.
D. Require the clients to use async operations when calling the service.
Answer: AB
Microsoft후기 070-521-VB최신덤프 070-521-VB덤프 070-521-VB강좌 070-521-VB교재 070-521-VB덤프다운
NO.3 You are creating a Windows Communication Foundation (WCF) service. You do not want to expose the
internal implementation at the service layer. You need to expose the following class as a service named
Arithmetic with an operation named Sum.
Public Class Calculator
Public Function Add(ByVal x As Integer,
ByVal y As Integer) As Integer
End Function
End Class
Which code segment should you use?
A. <ServiceContract(Namespace:="Arithmetic")>
Public Class Calculator
<OperationContract(Action:="Sum")>
Public Function Add(ByVal x As Integer,
ByVal y As Integer) As Integer
End Function
End Class
B. <ServiceContract(ConfigurationName:="Arithmetic")>
Public Class Calculator
<OperationContract(Action:="Sum")>
Public Function Add(ByVal x As Integer,
ByVal y As Integer) As Integer
End Function
End Class
C. <ServiceContract(Name:="Arithmetic")>
Public Class Calculator
<OperationContract(Name:="Sum")>
Public Function Add(ByVal x As Integer,
ByVal y As Integer) As Integer
End Function
End Class
D. <ServiceContract(Name:="Arithmetic")>
Public Class Calculator
<OperationContract(ReplyAction:="Sum")>
Public Function Add(ByVal x As Integer,
ByVal y As Integer) As Integer
End Function
End Class
Answer: C
Microsoft IT시험덤프 070-521-VB자격증 070-521-VB dumps
NO.4 You are adding a Windows Communication Foundation (WCF) service to an existing application. The
application is configured as follows. (Line numbers are included for reference only.)
01 <configuration>
02 <system.serviceModel>
03 <services>
04 <service name="Contoso.Sales.StockService"
05 behaviorConfiguration="MetadataBehavior">
06 <host>
07 <baseAddresses>
08 <add
baseAddress="http://contoso.com:8080/StockService" />
09 </baseAddresses>
10 </host>
11 </service>
12 </services>
13 <behaviors>
14 <serviceBehaviors>
15 <behavior name="MetadataBehavior">
16 </behavior>
NO.5 </behaviors>
You need to configure the service to publish the service metadata.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Add the following XML segment between lines 10 and 11.
<endpoint address=""
binding="mexHttpBinding"
contract="IMetadataExchange"
/>
B. Add the following XML segment between lines 10 and 11.
<endpoint address=""
binding="basicHttpBinding"
contract="IMetadataExchange"
/>
C. Add the following XML segment between lines15 and 16.
<serviceDiscovery>
<announcementEndpoints>
<endpoint address=""/>
</announcementEndpoints>
</serviceDiscovery>
D. Add the following XML segment between lines 15 and 16
<serviceMetadata httpGetEnabled="true"/>
Answer: AD
Microsoft 070-521-VB자격증시험 070-521-VB 070-521-VB교재
17. Four Windows Communication Foundation (WCF) services are hosted in Microsoft Internet
Information Services (IIS). No behavior configuration exists in the web.config file.
You need to configure the application so that every service and endpoint limits the number of concurrent
calls to 50 and the number of concurrent sessions to 25.
Which XML segment should you add to the system.serviceModel configuration section of the web.config
file?
A. <behaviors>
<serviceBehaviors>
<behavior name="*">
<serviceThrottling maxConcurrentCalls="50" maxConcurrentSessions="25"/>
</behavior>
</serviceBehaviors>
</behaviors>
B. <behaviors>
<serviceBehaviors>
<behavior name="default">
<serviceThrottling maxConcurrentCalls="50" maxConcurrentSessions="25"/>
</behavior>
</serviceBehaviors>
</behaviors>
C. <behaviors>
<serviceBehaviors>
<behavior name="">
<serviceThrottling maxConcurrentCalls="50" maxConcurrentSessions="25"/>
</behavior>
</serviceBehaviors>
</behaviors>
D. <behaviors>
<serviceBehaviors>
<behavior name="ALL">
<serviceThrottling maxConcurrentCalls="50" maxConcurrentSessions="25"/>
</behavior>
</serviceBehaviors>
</behaviors>
Answer: C
Microsoft최신덤프 070-521-VB덤프 070-521-VB자격시험 070-521-VB교육 070-521-VB dump
18. The endpoint of a Windows Communication Foundation (WCF) service uses basicHttpBinding for its
binding. Your company's policies have changed to require that messages not be sent in clear text.
You must ensure that all messages are encrypted when traveling across the network.
What should you do?
A. Set the ProtectionLevel property on the service contract and update the binding attribute in the
endpoint element of the configuration file to wsHttpBinding.
B. Set the ProtectionLevel property on the service contract and update the bindingConfiguration attribute
in the endpoint element of the configuration file to webHttpBinding.
C. Set the PrincipalPermissionAttribute on the service contract and update the binding attribute in the
endpoint element of the configuration file to wsHttpBinding.
D. Set the PrincipalPermissionAttribute on the service contract and update the bindingConfiguration
attribute in the endpoint element of the configuration file to wsHttpBinding.
Answer: A
Microsoft인증 070-521-VB 070-521-VB최신버전덤프
NO.6 You are creating a Windows Communication Foundation (WCF) service based on WSHttpBinding.
New audit requirements dictate that callers must be authenticated on every call to ensure that their
credentials have not been revoked.
You need to ensure that the service will not cache the security request token.
What should you do?
A. Apply a ServiceBehavior attribute to the service implementation class with the InstanceContextMode
property set to Single.
B. In the message security configuration, change clientCredentialType from IssuedToken to UserName.
C. In the message security configuration, set establishSecurityContext to false.
D. At the end of every operation, call the SessionStateUtility.RaiseSessionEnd method.
Answer: C
Microsoft최신덤프 070-521-VB자격증 070-521-VB IT국제자격증 070-521-VB덤프다운 070-521-VB최신덤프
NO.7 You are consuming a Windows Communication Foundation (WCF) service in an ASP.NET Web
application. The service interface is defined as follows.
<ServiceContract()>
Public Interface ICatalog
<OperationContract()>
<WebGet(UriTemplate:="/Catalog/Items/{id}",
ResponseFormat:=WebMessageFormat.Json)>
Function RetrieveItemDescription(ByVal id As Integer) As String
End Interface
The service is hosted at /Catalog.svc.
You need to call the service using jQuery to retrieve the description of an item as indicated by a variable
named itemId.
Which code segment should you use?
A. $.get(String.format("/Catalog.svc/Catalog/Items/?id={0}", itemId)
null,
function (data) {
},
"javascript");
B. $.get(String.format("/Catalog.svc/Catalog/Items/{0}", itemId),
null,
function (data) {
},
"json");
C. $.get(String.format("/Catalog.svc/Catalog/Items/{0}", itemId),
null,
function (data) {
},
"xml");
D. $.get(String.format("/Catalog.svc/Catalog/Items/id={0}", itemId),
null,
function (data) {
},
"json");
Answer: B
Microsoft덤프 070-521-VB덤프다운 070-521-VB Dumps 070-521-VB
NO.8 You are creating a Windows Communication Foundation (WCF) service that is implemented as follows.
(Line numbers are included for reference only.)
01 <ServiceContract()>
02 <ServiceBehavior(IncludeExceptionDetailInFaults:=True)>
03 Public Class OrderService
04
05 <OperationContract()>
06 Public Sub SubmitOrder(ByVal anOrder As Order)
07
08 Try
09
10 Catch ex As DivideByZeroException
11
12 End Try
13 End Sub
14
15 End Class
You need to ensure that the stack trace details of the exception are not included in the error information
sent to the client.
What should you do?
A. Replace line 11 with the following line.
Throw
B. Replace line 11 with the following line.
Throw New FaultException(Of Order)(anOrder, ex.ToString())
C. After line 05, add the following line.
<FaultContract(GetType(FaultException(Of Order)))>
Replace line 11 with the following line.
Throw ex
D. After line 05, add the following line.
<FaultContract(GetType(FaultException(Of Order)))>
Replace line 11 with the following line.
Throw New FaultException(Of Order)(
anOrder, "Divide by zero exception")
Answer: D
Microsoft교재 070-521-VB 070-521-VB dump 070-521-VB시험 070-521-VB최신버전덤프
댓글 없음:
댓글 쓰기