Hitachi인증 HH0-210시험을 패스하여 자격증을 취득하여 승진이나 이직을 꿈구고 있는 분이신가요? 이 글을 읽게 된다면Hitachi인증 HH0-210시험패스를 위해 공부자료를 마련하고 싶은 마음이 크다는것을 알고 있어 시장에서 가장 저렴하고 가장 최신버전의 Hitachi인증 HH0-210덤프자료를 강추해드립니다. 높은 시험패스율을 자랑하고 있는Hitachi인증 HH0-210덤프는 여러분이 승진으로 향해 달리는 길에 날개를 펼쳐드립니다.자격증을 하루 빨리 취득하여 승진꿈을 이루세요.
ITExamDump의Hitachi HH0-210시험자료의 문제와 답이 실제시험의 문제와 답과 아주 비슷합니다. 우리의 짧은 학습가이드로 빠른 시일 내에 관련지식을 터득하여 응시준비를 하게 합니다. 우리는 우리의Hitachi HH0-210인증시험덤프로 시험패스를 보장합니다.
시험 번호/코드: HH0-210
시험 이름: Hitachi (HDS Certified Implmenter-Enterprise)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 120 문항
업데이트: 2014-03-26
ITExamDump 에서 출시한Hitachi인증HH0-210 덤프는Hitachi인증HH0-210 실제시험의 출제범위와 출제유형을 대비하여 제작된 최신버전 덤프입니다. 시험문제가 바뀌면 제일 빠른 시일내에 덤프를 업데이트 하도록 최선을 다하고 있으며 1년 무료 업데이트서비스를 제공해드립니다. 1년 무료 업데이트서비스를 제공해드리기에 시험시간을 늦추어도 시험성적에 아무런 페를 끼치지 않습니다. ITExamDump에 믿음을 느낄수 있도록 구매사이트마다 무료샘플 다운가능기능을 설치하였습니다.무료샘플을 체험해보시고ITExamDump을 선택해주세요.
ITExamDump를 선택함으로, ITExamDump는 여러분Hitachi인증HH0-210시험을 패스할 수 있도록 보장하고,만약 시험실패시 ITExamDump에서는 덤프비용전액환불을 약속합니다.
HH0-210 덤프무료샘플다운로드하기: http://www.itexamdump.com/HH0-210.html
NO.1 What information is displayed on the Information tab page of Storage Navigator? (Choose two.)
A.the device view of the connected system
B.the product name of the connected system
C.the information for the root user of the connected device
D.the microcode version of the storage system
ANSWER: BD
Hitachi HH0-210 HH0-210인증 HH0-210 HH0-210 dump
NO.2 When is a microcode exchange process complete on a Hitachi Universal Storage Platform V?
A.When the message "An exchange of a microprogram finished" is displayed.
B.When all I/O resumes across all the mapped storage paths.
C.Once the SVP has rebooted.
D.When all the microprocessors flash memory update is complete.
ANSWER: D
Hitachi HH0-210 HH0-210시험문제
NO.3 You are enabling the Syslog transfer in Storage Navigator to send the Syslog output to the primary
Syslog server.
Which two additional settings must be made to allow the transfer? (Choose two.)
A.the primary server subnet settings
B.the IP address of the primary server
C.the Syslog file format
D.the port number for the primary server
ANSWER: BD
Hitachi자격증 HH0-210 HH0-210
NO.4 After completing a Hitachi Universal Storage Platform V installation or before upgrading the microcode,
which tool must you use to ensure that the SVP can communicate with all components of the system?
A.ping
B.traceroute
C.a network sniffer
D.diags LAN TEST
ANSWER: D
Hitachi기출문제 HH0-210 dump HH0-210기출문제
NO.5 To which two LANs must the SVP of a Hitachi Universal Storage Platform V be attached? (Choose two.)
A.customer's intranet
B.USP V internal LAN
C.HiTrack dedicated user port
D.secure management LAN
ANSWER: BD
Hitachi HH0-210 dump HH0-210 dumps HH0-210덤프
NO.6 Which three microcode exchange procedure modes are available in a Hitachi Enterprise storage
system? (Choose three.)
A.Alternate SCSI path
B.Non-Stop SCSI host
C.Postponed SCSI path
D.Skip SCSI microprocessor
E.Skip SCSI channel adapter
ANSWER: ABE
Hitachi최신덤프 HH0-210기출문제 HH0-210
NO.7 You are installing a new Hitachi Universal Storage Platform V system and need to exchange the short
wave SFP transceivers with the long wave type.
To perform the exchange, which two actions are required? (Choose two.)
A.Confirm successful replacement by checking that SFP indicators have changed from blue to green on
the Storage Navigator main screen.
B.Run the SFP exchange wizard.
C.Set SFP mode on the SVP.
D.Confirm successful replacement by checking 'SFP kind' information on the maintenance screen.
ANSWER: CD
Hitachi자료 HH0-210 HH0-210
NO.8 A TrueCopy project has the following requirements: Copy from site_A (Host_A) to site_B (Host_B).
You have defined two instances (horcm0.conf and horcm1.conf) for the application and one Command
Device (CMD_A on site_A and CMD_B on site_B.)
What are two valid combinations of distributing the instances and defining access to the Command
Devices on the different sites? (Choose two.)
A.Host_A has access to CMD_A and CMD_B and runs horcm0.conf and horcm1.conf.
B.Host_A has access to CMD_A and runs horcm0.conf. Host_B has access to CMD_A and runs
horcm1.conf.
C.Host_A has access to CMD_A and runs horcm0.conf. Host_B has access to CMD_B and runs
horcm1.conf.
D.Host_A has access to CMD_B and runs horcm0.conf. Host_B has access to CMD_B and runs
horcm1.conf.
ANSWER: AC
Hitachi HH0-210 dump HH0-210
NO.9 A customer is using a Hitachi Enterprise storage system with clustered servers in an active/passive
relationship.
What must be done in Hitachi Dynamic Link Manager (HDLM) to ensure that the status of inactive paths
on both passive and active nodes is monitored regularly?
A.Switch on Auto failback.
B.Setup intermittent Error Monitoring.
C.Switch on Path Health Check.
D.Set the reservation level to 2.
ANSWER: C
Hitachi HH0-210최신덤프 HH0-210자료
NO.10 Which two topology settings should be used when connecting a Hitachi Universal Storage Platform V
to a SAN switch? (Choose two.)
A.Public Loop
B.Private Loop
C.Point-to-Point
D.Fabric
ANSWER: CD
Hitachi인증 HH0-210 pdf HH0-210자격증
NO.11 Which ShadowImage operation is permitted when using Storage Navigator?
A.Manage pairs and manage consistency groups
B.Manage pairs but not manage consistency groups
C.Manage pairs only within consistency groups
D.Manage pairs in journal groups
ANSWER: B
Hitachi HH0-210 HH0-210자료 HH0-210시험문제 HH0-210 HH0-210최신덤프
NO.12 Which two activities can be performed without interrupting user access to data in a Hitachi Enterprise
storage system? (Choose two.)
A.Upgrade Cache Memory from 32GB to 64GB.
B.Run the CUDG4 (Control Unit DiaGnosis) test.
C.Change the DKC system emulation type.
D.Change a 2Gbps Fibre Channel feature to a 4Gbps Fibre Channel feature.
ANSWER: AD
Hitachi HH0-210 HH0-210자격증
NO.13 You have created a Storage Device List and some User Accounts within Storage Navigator. The SVP
has since failed and must be replaced.
How can you create a backup of this information so it can be easily restored after the failed SVP is
replaced?
A.Restore the ghost image available on the SVP.
B.Use HiSat to keep track of the information in a CSV format.
C.Ask the customer engineer to copy the source files from the SVP.
D.Use the download configuration function of the Storage Navigator control panel.
ANSWER: D
Hitachi HH0-210최신덤프 HH0-210 HH0-210최신덤프
NO.14 You need to enable Copy-on-Write SnapShot software on a Hitachi Universal Storage Platform VM.
Which two are required? (Choose two.)
A.remote replication license
B.ShadowImage license
C.additional cache memory
D.additional shared memory
ANSWER: BD
Hitachi dumps HH0-210 HH0-210
NO.15 You install a temporary license for a specific feature.
How long is the feature available on a Hitachi Enterprise storage system?
A.45 days
B.90 days
C.120 days
D.180 days
ANSWER: C
Hitachi시험문제 HH0-210 HH0-210
NO.16 You are connecting a Hitachi AMS2000 Family (AMS) system as external storage behind a Hitachi
Universal Storage Platform V. You are using one path to each controller on the AMS2000 system.
Which statement describes how to complete the configuration?
A.Enable intermittent error monitoring for both paths.
B.Set path mode to "Multi".
C.No special setting is needed.
D.Set the primary path to point to the AMS default controller.
ANSWER: C
Hitachi HH0-210기출문제 HH0-210 dump HH0-210 HH0-210 pdf
NO.17 Which three statements describe the Service Processor (SVP) of the Hitachi Universal Storage
Platform VM? (Choose three.)
A.The SVP does have a display and keyboard.
B.The SVP has access to user data stored on the system.
C.Connecting the SVP with a service center enables remote maintenance of the system.
D.The SVP collects performance data for all key components of the system.
E.The SVP enables the service representative to configure, maintain and upgrade the system.
ANSWER: CDE
Hitachi HH0-210인증 HH0-210 HH0-210 HH0-210 dumps HH0-210
NO.18 Which two steps must be taken when performing a microcode exchange on a Hitachi Universal
Storage Platform VM? (Choose two.)
A.Disconnect the SVP from the customer LAN.
B.Confirm that all components are at the correct starting code level.
C.Update SVP microcode last.
D.Resolve all SIMS before beginning a microcode exchange.
ANSWER: BD
Hitachi HH0-210 HH0-210덤프 HH0-210기출문제 HH0-210
NO.19 Which three factors must be considered when planning a Non-stop SCSI microcode exchange on a
Universal Storage Platform V? (Choose three.)
A.Force production host data paths to failover to the alternate cluster.
B.Schedule a time when the I/O workload is low.
C.Confirm that all LUNs, external storage, and remote replication links have multiple paths across both
clusters.
D.Save the contents of the shared memory to the SVP hard disk.
E.Ensure that the microprocessors are less than 50 percent busy.
ANSWER: BCE
Hitachi HH0-210기출문제 HH0-210자격증 HH0-210자격증 HH0-210 HH0-210
NO.20 What is the purpose of the System Assurance Document?
A.to ensure accurate and complete record of pre-installation data
B.to guarantee that HDS equipment is insured during transportation
C.to inform a channel partner that equipment is available for shipment
D.to validate configuration changes for customers with a premium service contract
ANSWER: A
Hitachi HH0-210 HH0-210최신덤프 HH0-210시험문제
ITexamdump의 000-N34덤프의 VCE테스트프로그램과 74-338덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 1z0-481시험에 대비한 고품질 덤프와 70-415시험 최신버전덤프를 제공해드립니다. 최고품질 JN0-102시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기