SAP인증 C_TBIT44_71시험을 패스하는 지름길은ITExamDump에서 연구제작한 SAP 인증C_TBIT44_71시험대비 덤프를 마련하여 충분한 시험준비를 하는것입니다. 덤프는 SAP 인증C_TBIT44_71시험의 모든 범위가 포함되어 있어 시험적중율이 높습니다. SAP 인증C_TBIT44_71시험패는 바로 눈앞에 있습니다. 링크를 클릭하시고ITExamDump의SAP 인증C_TBIT44_71시험대비 덤프를 장바구니에 담고 결제마친후 덤프를 받아 공부하는것입니다.
SAP C_TBIT44_71인증시험은 현재IT인사들 중 아주 인기 잇는 인증시험입니다.SAP C_TBIT44_71시험패스는 여러분의 하시는 일과 생활에서 많은 도움을 줄뿐만 아니라 중요한 건 여러분의IT업계에서의 자기만의 자리를 지키실 수 잇습니다.이렇게 좋은 시험이니 많은 분들이 응시하려고 합니다,하지만 패스 율은 아주 낮습니다.
SAP인증C_TBIT44_71시험을 패스함으로 취업에는 많은 도움이 됩니다. ITExamDump는SAP인증C_TBIT44_71시험패스로 꿈을 이루어주는 사이트입니다. 우리는SAP인증C_TBIT44_71시험의 문제와 답은 아주 좋은 학습자료로도 충분한 문제집입니다. 여러분이 안전하게 간단하게SAP인증C_TBIT44_71시험을 응시할 수 있는 자료입니다.
시험 번호/코드: C_TBIT44_71
시험 이름: SAP (SAP Certified Development Associate - Process Integration with SAP NetWeaver (PI 7.1))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 80 문항
업데이트: 2014-03-12
SAP인증 C_TBIT44_71시험을 등록하였는데 시험준비를 어떻게 해애 될지 몰라 고민중이시라면 이 글을 보고ITExamDump를 찾아주세요. ITExamDump의SAP인증 C_TBIT44_71덤프샘플을 체험해보시면 시험에 대한 두려움이 사라질것입니다. ITExamDump의SAP인증 C_TBIT44_71덤프는SAP인증 C_TBIT44_71실제시험문제를 마스터한 기초에서 제작한 최신시험에 대비한 공부자료로서 시험패스율이 100%입니다. 하루 빨리 덤프를 마련하여 시험을 준비하시면 자격증 취득이 빨라집니다.
ITExamDump의 SAP 인증 C_TBIT44_71시험덤프공부자료는 pdf버전과 소프트웨어버전 두가지 버전으로 제공되는데 SAP 인증 C_TBIT44_71실제시험예상문제가 포함되어있습니다.덤프의 예상문제는 SAP 인증 C_TBIT44_71실제시험의 대부분 문제를 적중하여 높은 통과율과 점유율을 자랑하고 있습니다. ITExamDump의 SAP 인증 C_TBIT44_71덤프를 선택하시면 IT자격증 취득에 더할것 없는 힘이 될것입니다.
C_TBIT44_71 덤프무료샘플다운로드하기: http://www.itexamdump.com/C_TBIT44_71.html
NO.1 The communication between the Integration Server and the backend applications can be achieved
without adapters.
Which message protocol should you use for this communication type?
A. RFC-XML
B. PI-SOAP Protocol
C. File
D. JDBC 2.0
Answer: B
SAP인증 C_TBIT44_71기출문제 C_TBIT44_71 C_TBIT44_71 pdf
NO.2 Which of these operations can be performed by a Container Operation step?
A. Incrementing a counter variable.
B. Appending a message to a multiline container element.
C. Removing a message from a multiline container element.
D. Setting the value of an XML element of a message.
Answer: A,B
SAP시험문제 C_TBIT44_71자료 C_TBIT44_71덤프 C_TBIT44_71시험문제 C_TBIT44_71 dump
NO.3 You can create multiple configurations for one Integration Process without changing the appropriate
process definition.
Which of these parameters allows you to achieve this behavior?
A. Process Signature
B. Container Definition
C. Correlation
D. Configurable Parameters in Conditions
Answer: D
SAP시험문제 C_TBIT44_71 C_TBIT44_71인증
NO.4 You configure the sender RFC adapter to convert RFC calls from a sender to XML messages. These
XML messages are then sent to the Integration Server or to the PCK.
What is the purpose of the RFC adapter parameter "Program ID"?
A. The Program ID is a unique identifier for outbound proxies.
B. The Program ID must uniquely describe the RFC sender communication channel in the configured
application server gateway.
C. The Program ID identifies proxy classes for Service Interfaces.
D. The Program ID is used in correlation for binding abstract interfaces.
Answer: B
SAP pdf C_TBIT44_71 C_TBIT44_71 C_TBIT44_71 dumps
NO.5 For the delivery mode of an integration process, you can choose between inbound processing with or
without buffering.
Which of these statements correctly describes the Inbound processing mode?
A. SAP recommends the mode for inbound processing with buffering.
B. SAP recommends the mode for inbound processing without buffering.
C. If you select inbound processing without buffering, the qRFC entry returns an error when a message is
to be delivered to a process instance for which no receive step is active.
D. If you select inbound processing with buffering and there is no active receive step available to receive
an incoming message, the message is buffered in a separate, process-instance-specific queue.
Answer: B,C,D
SAP dump C_TBIT44_71 dump C_TBIT44_71
NO.6 A special aspect in B2B business processes is that the business partners involved in these processes
do not usually provide information about their internal system landscape.
Which configuration objects are relevant for B2B configuration?
A. Receiver Determination
B. Communication Party
C. Software Component Version (SWCV)
D. Communication Channel
Answer: A,B,D
SAP C_TBIT44_71 pdf C_TBIT44_71 dumps C_TBIT44_71
NO.7 Which statements are correct when using the Receiver File adapter to process XML messages?
A. The messages are processed based on a poll cycle.
B. The adapter can convert the XML payload into a flat file.
C. The adapter can FTP the file to a remote directory.
D. The quality of service can be 'best effort' (BE) only.
Answer: B,C
SAP자료 C_TBIT44_71인증 C_TBIT44_71인증
NO.8 You have implemented a scenario where IDocs are posted to an ERP system using the receiver IDoc
adapter.
Which statements correctly describe the receiver IDoc adapter of SAP NetWeaver PI?
A. IDoc packages are not supported, unless all IDocs are collected by BPM.
B. Specific fields in the IDoc control record can be overwritten using the 'header mapping' functionality in
the Receiver Agreement.
C. Quality of service EOIO (exactly once in order) is supported, provided that the target system is a SAP
Web AS 6.40 or above.
D. If the target system is SAP Web AS 6.20 or under, then the quality of service BE (best effort) and EO
(exactly once) can be used.
E. A receiver communication channel must be defined in the Integration Builder.
Answer: B,C,E
SAP C_TBIT44_71 C_TBIT44_71시험문제
NO.9 To react to situations where it is not possible or not advisable to continue a process in the normal way,
you can define exceptions.
Which statements correctly describe the triggering of exceptions?
A. A synchronous or asynchronous Send step can trigger an exception when a system error occurs.
B. Every step type can trigger an exception when a permanent error occurs.
C. A Control step can trigger an exception.
D. A Transformation step can trigger an exception.
E. Exceptions can only be triggered by Control steps.
Answer: A,C,D
SAP덤프 C_TBIT44_71 C_TBIT44_71 C_TBIT44_71자격증 C_TBIT44_71
NO.10 If a system error occurs in a send step, an alert can be triggered for Alert Management and the
integration process should then be terminated.
Where do you define the Alert Category for the appropriate Control Step?
A. Within the SLD
B. Within the transaction ALRTCATDEF on the Integration Server
C. Within the Enterprise Services Builder
D. Within the Process Editor
Answer: B
SAP C_TBIT44_71덤프 C_TBIT44_71기출문제 C_TBIT44_71
NO.11 The PI Mail adapter is used to send and receive emails. Which protocols are supported?
A. SMTP
B. HTTP
C. IMAP4
D. POP3
Answer: A,C,D
SAP C_TBIT44_71 C_TBIT44_71 dump
NO.12 Which Process Integration objects can be used in an integration process?
A. All objects displayed in the navigation area of the Integration Builder.
B. All objects within the software component version of the integration process.
C. Only the objects within the namespace of the integration process.
D. All objects displayed in the Process Integration Scenario using this process.
Answer: B
SAP C_TBIT44_71 C_TBIT44_71 C_TBIT44_71
NO.13 You are implementing an IDoc-based scenario using SAP Netweaver PI and more specifically the
sender IDoc adapter.
Which of these steps are mandatory for the sender IDoc adapter to function properly?
A. IDoc metadata must be imported into the Enterprise Services Repository.
B. The Logical System name (ALE name) for the Business System must be defined in the SLD.
C. A sender communication channel must be defined in the Integration Builder.
D. An RFC destination must be defined on the sender system, pointing to the Integration Server client.
Answer: A,B,D
SAP C_TBIT44_71 C_TBIT44_71 dump C_TBIT44_71최신덤프 C_TBIT44_71
NO.14 Assume that your customer has a scenario in which a database table needs to be queried (i.e. to
perform a SELECT statement and obtain the result set).
What are the viable options for implementing this with the PI JDBC adapter?
A. Use the sender JDBC adapter to query the database asynchronously.
B. Use the sender JDBC adapter to query the database synchronously.
C. Use the receiver JDBC adapter to query the database synchronously.
D. Use the receiver JDBC adapter to query the database asynchronously.
Answer: A,C
SAP C_TBIT44_71 C_TBIT44_71덤프 C_TBIT44_71인증
NO.15 You have created a deadline branch. When the deadline has expired, the integration process should be
canceled.
How can this be achieved?
A. In the deadline branch, insert a control step that cancels the process.
B. The process is automatically stopped once the deadline has expired.
C. As the process can only be stopped by the administrator, a control step that raises an alert to inform
the administrator has to be inserted.
D. Insert a switch with an appropriate condition to stop the process.
Answer: A
SAP dump C_TBIT44_71 dumps C_TBIT44_71인증
ITexamdump의 70-332덤프의 VCE테스트프로그램과 VCP510PSE덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-247시험에 대비한 고품질 덤프와 VCP-510시험 최신버전덤프를 제공해드립니다. 최고품질 000-N55시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기