Microsoft 070-545-VB 덤프데모

ITExamDump는 우수한 IT인증시험 공부가이드를 제공하는 전문 사이트인데 업계에서 높은 인지도를 가지고 있습니다. ITExamDump에서는 IT인증시험에 대비한 모든 덤프자료를 제공해드립니다. Microsoft인증 070-545-VB시험을 준비하고 계시는 분들은ITExamDump의Microsoft인증 070-545-VB덤프로 시험준비를 해보세요. 놀라운 고득점으로 시험패스를 도와드릴것입니다.시험에서 불합격하면 덤프비용 전액환불을 약속드립니다.

IT인증시험을 쉽게 취득하는 지름길은ITExamDump에 있습니다. ITExamDump의Microsoft인증 070-545-VB덤프로 시험준비를 시작하면 성공에 가까워집니다. Microsoft인증 070-545-VB덤프는 최신 시험문제 출제방향에 대비하여 제작된 예상문제와 기출문제의 모음자료입니다. Microsoft인증 070-545-VB덤프는 시험을 통과한 IT업계종사자분들이 검증해주신 세련된 공부자료입니다. ITExamDump의Microsoft인증 070-545-VB덤프를 공부하여 자격증을 땁시다.

시험 번호/코드: 070-545-VB

시험 이름: Microsoft (TS:Microsoft Visio 2007, Application Development)

IT업계의 치열한 경쟁속에 살아 남으려면 자신의 능력을 증명하여야 합니다. 국제승인을 받는 IT인증자격증을 많이 취득하시면 취직이든 승진이든 이직이든 모든 면에서 이득을 볼수 있습니다. 최근 Microsoft인증 070-545-VB시험에 도전하는 분이 많은데 ITExamDump에서 Microsoft인증 070-545-VB시험에 대비한 가장 최신버전 덤프공부가이드를 제공해드립니다.

ITExamDump 의 Microsoft인증 070-545-VB시험에 도전장을 던지셨나요? 현황에 만족하지 않고 열심히 하는 모습에 박수를 보내드립니다. Microsoft인증 070-545-VB시험을 학원등록하지 않고 많은 공부자료 필요없이ITExamDump 에서 제공해드리는 Microsoft인증 070-545-VB덤프만으로도 가능합니다. 수많은 분들이 검증한Microsoft인증 070-545-VB덤프는 시장에서 가장 최신버전입니다.가격도 친근하구요.

070-545-VB 덤프무료샘플다운로드하기: http://www.itexamdump.com/070-545-VB.html

NO.1 You are developing an Office Visio 2007 Shared Add-in.
You construct an event sink class that listens to events from the Visio 2007 Application, Document, Page,
and Shape objects. The VisEventProc function has the following signature:
Public Function VisEventProc(
ByVal eventCode As Short,
ByVal source As Object,
ByVal eventId As Integer,
ByVal eventSequenceNumber As Integer,
ByVal subject As Object,
ByVal moreInformation As Object) As Object
You need to construct a switch to identify the object that raised the event.
Which parameter should you use?
A. eventCode
B. moreInformation
C. source
D. subject
Answer: C

Microsoft dump   070-545-VB   070-545-VB   070-545-VB

NO.2 You are developing an Office Visio 2007 Shared Add-in. You need to prevent shape deletions by
using custom logic. What should you do?
A. Configure the add-in to listen to the QueryCancelPageDelete event of the Visio 2007 application.
B. Configure the add-in to listen to the QueryCancelSelectionDelete event of the Visio 2007 application.
C. Configure the add-in to listen to the BeforeShapeDelete event of the Visio 2007 application.
D. Configure the add-in to listen to the BeforeSelectionDelete event of the Visio 2007 application.
Answer: B

Microsoft최신덤프   070-545-VB최신덤프   070-545-VB dumps   070-545-VB자격증   070-545-VB   070-545-VB

NO.3 You are developing an Office Visio 2007 Shared Add-in. You need to modify the add-in to perform an
action after the Visio 2007 application flushes its events queue. What should you do?
A. Listen for AppDeactivated.
B. Listen for RunModeEntered.
C. Listen for MustFlushScopeBeginning.
D. Queue a MarkerEvent and then listen for a MarkerEvent.
Answer: D

Microsoft덤프   070-545-VB인증   070-545-VB시험문제

NO.4 You are developing an Office Visio 2007 Shared Add-in. You create three objects named objMaster,
objPage, and objWindow. The object objMaster references a local copy of the master. The object objPage
references the current page. The object objWindow references the active window. You need to create
several shape instances of the master on the current page at specific coordinates in the active window.
Which method should you use?
A. objPage.Drop()
B. objPage.DropMany()
C. objWindow.CreateSelection()
D. objMaster.Shapes.Item(1).Copy() objPage.Paste()
Answer: B

Microsoft dumps   070-545-VB   070-545-VB   070-545-VB덤프   070-545-VB

NO.5 You are developing an Office Visio 2007 Shared Add-in. You create an object named objShape that
references a new shape. You need to modify the add-in to identify the shape if the shape is moved to a
different page. Which property of objShape should you reference?
A. ID
B. Name
C. NameID
D. UniqueID(visGetOrMakeGUID)
Answer: D

Microsoft   070-545-VB   070-545-VB   070-545-VB   070-545-VB자료

NO.6 You are creating an application that will be used to connect two two-dimensional (2-D) shapes by
using a Dynamic Connector shape. In your application, you create an object named myVisioApp that
references the Visio Application object. You need to add code to your application to connect the 2-D
shapes. What code should you add?
A. myVisioApp.Active P age.Shapes(1). Cells(PinX). GlueTo( myVisioApp.Active P
age.Shapes(2) .Cells(PinX) )
B. myVisioApp.Active P age. Shapes(1).Cells(BeginX).GlueTo
myVisioApp.ActivePage.Shapes(2).Cells(Connections.X1)
C. myVisioApp.Active P age.Shapes(1).AutoConnect( myVisioApp.Active P age.Shapes(2),
visAutoConnectDirNone)
D. myVisioApp.Active P age.Shapes(1).AutoConnect( myVisioApp.Active P age.Shapes( 1 ) ,
visAutoConnectDirRight )
Answer: C

Microsoft   070-545-VB   070-545-VB   070-545-VB

NO.7 You have a Windows Forms application that contains an embedded Visio Drawing Control. You have
an Office Visio 2007 drawing saved as C:\Template.vsd. You need to configure the application to load
and display the drawing as a template by using the Visio Drawing Control. Which code should you add
to the application?
A. Me.axDrawingControl1. Document. Application.Documents.Open( " C:\Template.VSD " )
B. Me.axDrawingControl1.Window.Application.Documents.Open( " C:\Template.VSD " )
C. Me.axDrawingControl1.Src = " C:\Template.VSD "
D. Dim openDockedFlag As Short = CShort(Visio.VisOpenSaveArgs.visOpenDocked)
Me.axDrawingControl1.Window.Application.Documents. OpenEx("C:\Template.VSD",openDockedFlag)
Answer: C

Microsoft   070-545-VB   070-545-VB dumps

NO.8 You plan to create an Office Visio 2007 application. You need to prevent Visio 2007 from failing in the
event that there is a fault in the application. What are three possible ways to achieve this goal? (Each
correct answer presents a complete solution. Choose three.)
A. Create a VBA solution.
B. Create a VSL solution.
C. Create an EXE add-on solution.
D. Create a Shared Add-in solution, and then use the COM Shim Wizard to create a DLL.
E. Create a Shared Add-in solution by using Microsoft Visual Studio 2005 Tools for Office Second Edition.
Answer: CDE

Microsoft pdf   070-545-VB   070-545-VB

NO.9 You create a custom template and several custom stencils. You need the stencils to open
automatically when a new file is created from the template. What should you do?
A. Deploy the stencils to the My Shapes folder.
B. Deploy the stencils to the same folder as the template.
C. Dock the stencils in the template workspace, and then save the template.
D. Modify the Office Visio 2007 application settings to contain the path to the stencils.
Answer: C

Microsoft dumps   070-545-VB인증   070-545-VB   070-545-VB기출문제

NO.10 You need to develop an Office Visio 2007 solution for 1,000 computers that run Visio 2007. The solution
must meet the following requirements:
The solution must not require the installation of additional components, tools, or DLLs.
Users must be able to customize the solution without installing additional development tools.
What should you develop?
A. A template and a Visio Solutions Library (VSL)
B. A custom stencil that uses ShapeSheet programming
C. A Windows Forms application that contains the Visio Drawing Control
D. A solution by using Microsoft Visual Studio 2005 Tools for Office Second Edition
Answer: B

Microsoft   070-545-VB시험문제   070-545-VB   070-545-VB dumps

Microsoft 070-545-VB인증시험은 전문적인 관련지식을 테스트하는 인증시험입니다. ITExamDump는 여러분이Microsoft 070-545-VB인증시험을 통과할 수 잇도록 도와주는 사이트입니다. 많은 분들이 많은 시간과 돈을 들여 혹은 여러 학원 등을 다니면서Microsoft 070-545-VB인증시험패스에 노력을 다합니다. 하지만 우리ITExamDump에서는 20시간 좌우만 투자하면 무조건Microsoft 070-545-VB시험을 패스할 수 있도록 도와드립니다.