Motorola Solutions MSC-131 최신덤프

Motorola Solutions인증 MSC-131시험패스 공부방법을 찾고 있다면 제일 먼저ITExamDump를 추천해드리고 싶습니다. Motorola Solutions인증 MSC-131시험이 많이 어렵다는것은 모두 알고 있는 것입니다. ITExamDump에서 출시한 Motorola Solutions인증 MSC-131덤프는 실제시험을 대비하여 연구제작된 멋진 작품으로서 Motorola Solutions인증 MSC-131시험적중율이 최고입니다. Motorola Solutions인증 MSC-131시험패스를 원하신다면ITExamDump의 제품이 고객님의 소원을 들어줄것입니다.

Motorola Solutions MSC-131인증시험패스에는 많은 방법이 있습니다. 먼저 많은 시간을 투자하고 신경을 써서 전문적으로 과련 지식을 터득한다거나; 아니면 적은 시간투자와 적은 돈을 들여 ITExamDump의 인증시험덤프를 구매하는 방법 등이 있습니다.

ITExamDump는 여러분이 빠른 시일 내에Motorola Solutions MSC-131인증시험을 효과적으로 터득할 수 있는 사이트입니다.Motorola Solutions MSC-131덤프는 보장하는 덤프입니다. 만약 시험에서 떨어지셨다고 하면 우리는 무조건 덤프전액 환불을 약속 드립니다. 우리ITExamDump 사이트에서Motorola Solutions MSC-131관련자료의 일부분 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다. 체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. ITExamDump의Motorola Solutions MSC-131덤프로 자신 있는 시험준비를 하세요.

꿈을 안고 사는 인생이 멋진 인생입니다. 고객님의 최근의 꿈은 승진이나 연봉인상이 아닐가 싶습니다. Motorola Solutions인증 MSC-131시험은 IT인증시험중 가장 인기있는 국제승인 자격증을 취득하는데서의 필수시험과목입니다.그만큼 시험문제가 어려워 시험도전할 용기가 없다구요? 이제 이런 걱정은 버리셔도 됩니다. ITExamDump의 Motorola Solutions인증 MSC-131덤프는Motorola Solutions인증 MSC-131시험에 대비한 공부자료로서 시험적중율 100%입니다.

시험 번호/코드: MSC-131

시험 이름: Motorola Solutions (Design and Deploy AirDefense Solutions)

MSC-131 덤프무료샘플다운로드하기: http://www.itexamdump.com/MSC-131.html

NO.1 What security exists for the communication between sensors and the ADSP appliance?
A. EAP-TTLS and SSL
B. PEAP and SSL
C. PKI and SSL
D. EAP-TLS and SSL
Answer: C

Motorola Solutions dumps   MSC-131   MSC-131

NO.2 Spectrum Analysis can be performed using different modes of operation. Which of following modes
would be the most appropriate to use if you need to perform a Spectrum Analysis and capture information
about the data link layer (Layer 2 of OSI model)?
A. Dual Layer Scan Mode
B. Continuous Scan Mode
C. Background Scan Mode
D. Interference Scan Mode
Answer: C

Motorola Solutions시험문제   MSC-131   MSC-131기출문제

NO.3 What is the purpose of the Bonding command in the ADSP CLI.?
A. The Bonding command is used to link sensors to the correct container in the ADSP tree.
B. The Bonding command is used to enable the Primary and Secondary ADSP appliances to synchronize.
C. The Bonding command is used to enable both of the NIC's on ADSP's system board to act as one for
high availability.
D. The Bonding command is used to ensure that both the Primary and Secondary ADSP appliances are
configured to use the same IP address.
Answer: C

Motorola Solutions최신덤프   MSC-131 dumps   MSC-131   MSC-131자료

NO.4 Your company processes and stores credit card information in a corporate database. You must be able
to determine the status of the company's compliance to the Payment Card Industry (PCI) standard with
regard to wireless device use. How can this be accomplished using ADSP?
A. By running a PCI compliance report at each of the retail store levels of your ADSP tree.
B. By running a PCI compliance report at the accounting department level of your ADSP tree,
C. By running a PCI compliance report at the system level of your ADSP tree.
D. By running a PCI compliance report at network operations center level of your ADSP tree.
Answer: C

Motorola Solutions pdf   MSC-131   MSC-131인증   MSC-131   MSC-131

NO.5 You are the administrator of a very large ADSP installation protecting an international WLAN
deployment. Running a compliance report each day for your boss takes a great deal of your time in the
mornings. What can you do using ADSP to reduce the amount of your time it takes to render this
information and deliver it to your boss?
A. Create a Guest account for your boss. Teach them to run their own each day, leaving you free for other
tasks.
B. Create an Admin account for your boss. Teach them to run their own each day, leaving you free for
other tasks.
C. Add the desired report to the Data Collection Polling interval with a daily schedule to be emailed to your
boss.
D. Add the report to your favorites list. Then schedule it to run at an off peak time and to automatically be
emailed to your boss each day.
Answer: D

Motorola Solutions   MSC-131시험문제   MSC-131   MSC-131   MSC-131시험문제

NO.6 When would the configuration of ADSP include the use of a RADIUS server?
A. When LDAP is not available
B. When sensor validation is required
C. When sensors require a VPN connection
D. When centralized authentication is required
Answer: D

Motorola Solutions자료   MSC-131   MSC-131   MSC-131   MSC-131   MSC-131

NO.7 You used the Report Builder to create a custom template to support your PCI compliance initiative.
Two weeks later you decide to use the report but you're not quite sure where to locate it. How would you
access this template?
A. By selecting it in the Custom Reports found in the reporting feature
B. By using the search feature in the Web reporting interface
C. By selecting it under the Inactive category on the Reports page
D. By using the Templates drop down box in the Report Builder application
Answer: A

Motorola Solutions   MSC-131   MSC-131   MSC-131 dump

NO.8 You have configured your ADSP appliance to use a RADIUS server to validate user credentials upon
GUI logon. However, users continue to be validated directly by ADSP. What additional step must be taken
to ensure GUI users are authenticated via the RADIUS server you configured when they are logging into
ADSP?
A. The ADSP appliance must be rebooted to ensure the settings are recorded properly
B. Each user account must be configured to use the correct RADIUS server for authentication
C. You must log into the CLI using the SMXMGR account and run the Enforce Credentials command
D. Log into the GUI with your admin account and click on the Synchronize RADIUS Accounts button in
Appliance Manager
Answer: B

Motorola Solutions pdf   MSC-131   MSC-131   MSC-131   MSC-131   MSC-131인증

NO.9 Which of the following appropriately characterizes a rogue access point (AP)?
A. An AP that is causing Co-Channel interference with your APs.
B. An AP that is not the same brand as your customers APs.
C. An AP that is on your wired network without proper authorization.
D. An AP that is not using the security required by corporate policy.
Answer: C

Motorola Solutions dump   MSC-131자격증   MSC-131기출문제   MSC-131 dump   MSC-131기출문제   MSC-131

NO.10 A new coffee shop opens in your building offering hot-spot internet access. Several of your users are
connecting to the hot-spot while at their desks to bypass your firewall rules. What is the best thing that can
be done using the ADSP system to prevent this?
A. Integrate with the firewall using SNMP and import the same firewall rules.
B. Create a termination policy to prevent accidental associations of authorized AP's.
C. Create a termination policy to prevent authorized stations from using ad-hoc networks.
D. Create a termination policy to prevent accidental associations of your work stations to unauthorized
networks.
Answer: D

Motorola Solutions dump   MSC-131인증   MSC-131   MSC-131최신덤프

NO.11 How can the Wireless Intrusion Protection System (WIPS) feature of the Motorola Solutions
AirDefense Services Platform (ADSP) be used to protect your Wi-Fi network?
A. The WIPS system can remove rogue access points from neighboring networks
B. The WIPS system can utilize RF Jamming to keep your channels clear.
C. The WIPS system can identify wired leakage and other network vulnerabilities
D. The WIPS system can stop neighboring devices from using your channels
Answer: C

Motorola Solutions dump   MSC-131최신덤프   MSC-131덤프   MSC-131

NO.12 Broadcasting the SSID and allowing the access point to respond to clients with no SSID makes it easier
for the clients, but some consider it a security loophole. The theory for disallowing these two practices is
that it helps ° h i d ¡± t h e n e t w ork
What is the problem with this theory?
A. Hiding the SSID turns off the beacons thus disabling passive scanning
B. Not responding to null SSIDs causes the EAP process to break down
C. These values must be present in order for intrusion detection systems to function
D. The SSID will still be present in probe request frames and can be seen with a protocol analyzer
Answer: D

Motorola Solutions   MSC-131최신덤프   MSC-131   MSC-131   MSC-131최신덤프   MSC-131 dump

NO.13 A requirement for seamless roaming in a Robust Security network is that the access points receive the
Pairwise Master Key (PMK) identifier from the station in the reassociation frame. What other information
must be included in that frame?
A. Any 802.1g VLAN tags.
B. The IP address and subnet mask.
C. The randomly generated shared secret.
D. The MAC address of the old access point.
Answer: D

Motorola Solutions덤프   MSC-131기출문제   MSC-131

NO.14 Which of the following best defines a "security risk"?
A. The likelihood of being targeted by a given attack, of an attack being successful, and general exposure
to a given threat.
B. The source and means of a particular type of attack.
C. The security flaws in a system that allow an attack to be successful.
D. Reduced Instruction Set Kernel.
Answer: A

Motorola Solutions덤프   MSC-131최신덤프   MSC-131   MSC-131 dump

NO.15 There was a rogue AP on your network as detected by ADSP. The rogue was displayed in your Alarms.
When you run a wireless security posture details report for the same time range, the rogue does not
appear in the report. What is the most likely cause for the rogue not being in the report?
A. The report was run for a different scope than the one that detected the rogue.
B. Your account was not created in the scope level where the rogue was detected.
C. You are logged into ADSP as a guest account which lacks the permission to run the report.
D. The rogue device has been removed from the network and the corresponding alarm is now inactive.
Answer: A

Motorola Solutions   MSC-131덤프   MSC-131인증   MSC-131   MSC-131

수많은Motorola Solutions인증 MSC-131시험공부자료중에서ITExamDump의Motorola Solutions인증 MSC-131덤프가 가장 출중한 원인은 무엇일가요? ITExamDump의Motorola Solutions인증 MSC-131덤프는 실제시험문제의 출제방향을 연구하여 IT전문가로 되어있는 덤프제작팀이 만든 최신버전 덤프입니다. ITExamDump의Motorola Solutions인증 MSC-131덤프가 있으면 힘든Motorola Solutions인증 MSC-131시험이 쉬어져서 자격증을 제일 빠른 시간내에 취득할수 있습니다.제일 어려운 시험을 제일 간단한 방법으로 패스하는 방법은ITExamDump의Motorola Solutions인증 MSC-131덤프로 시험준비 공부를 하는것입니다.