2013년 7월 19일 금요일

HP HP0-D09 덤프데모

우리 ITExamDump사이트에서 제공되는HP인증HP0-D09시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보면 우리ITExamDump에 믿음이 갈 것입니다. 우리ITExamDump의 제품을 구매하신다고 하면 우리는 최선을 다하여 여러분들한테 최고의 버전을 제공함으로 한번에HP인증HP0-D09시험을 패스하도록 하겠습니다. IT시험이라고 모두 무조건 외우고 장악하고 많은 시간을 투자해야만 된다는 사상을 깨게 될 것입니다.


목표를 이루는 방법은 여러가지가 있는데 어느 방법을 선택하면 가장 빨리 목표를 이룰수 있을가요? HP인증 HP0-D09시험을 패스하는 길에는ITExamDump의HP인증 HP0-D09덤프를 공부하는 것이 가장 좋은 방법이라는것을 굳게 약속드립니다. ITExamDump의HP인증 HP0-D09덤프는 시험문제에 초점을 두어 제작된 공부자료이기에HP인증 HP0-D09패스를 가장 빠른 시일내에 한방에 할수 있도록 도와드립니다.


네트워크 전성기에 있는 지금 인터넷에서HP 인증HP0-D09시험자료를 많이 검색할수 있습니다. 하지만 왜ITExamDump덤프자료만을 믿어야 할가요? ITExamDump덤프자료는 실제시험문제의 모든 유형에 근거하여 예상문제를 묶어둔 문제은행입니다.시험적중율이 거의 100%에 달하여HP 인증HP0-D09시험을 한방에 통과하도록 도와드립니다.


ITExamDump의HP인증 HP0-D09덤프는 시험패스율이 거의 100%에 달하여 많은 사랑을 받아왔습니다. 저희 사이트에서 처음 구매하는 분이라면 덤프풀질에 의문이 갈것입니다. 여러분이 신뢰가 생길수 있도록ITExamDump에서는HP인증 HP0-D09덤프구매 사이트에 무료샘플을 설치해두었습니다.무료샘플에는 5개이상의 문제가 있는데 구매하지 않으셔도 공부가 됩니다. HP인증 HP0-D09덤프로HP인증 HP0-D09시험을 준비하여 한방에 시험패하세요.


시험 번호/코드: HP0-D09

시험 이름: HP (Implementing HP Converged Infrastructure Solutions)

ITExamDump의HP인증 HP0-D09덤프의 인지도는 아주 높습니다. 인지도 높은 원인은HP인증 HP0-D09덤프의 시험적중율이 높고 가격이 친근하고 구매후 서비스가 끝내주기 때문입니다. ITExamDump의HP인증 HP0-D09덤프로HP인증 HP0-D09시험에 도전해보세요.


HP0-D09 덤프무료샘플다운로드하기: http://www.itexamdump.com/HP0-D09.html


NO.1 .Which tool can you use to configure a shared data store for VMware hypervisor cluster?
A. VMware vCenter server
B. VMware hypervisor host profile
C. IO storage pool entry
D. Insight Control for VMware vCenter server
Answer: A

HP   HP0-D09   HP0-D09최신덤프   HP0-D09기출문제   HP0-D09 dump

NO.2 A current multi-enclosure Virtual Connect (VC) domain contains four BladeSystem enclosures cabled
together for a single VC domain. An additional BladeSystem enclosure needs to be added to the
environment.What will provide an optimized and fault tolerant configuration with room for future
expansion?
A. adding the additional BladeSystem enclosure to the current VC domain and configuring in Virtual
Connect Manager
B. creating a secondary VC domain with the new BladeSystem enclosure and configuring in Virtual
Connect SmartStart Manager
C. splitting the current VC domain into two separate VC domains and adding the new BladeSystem
enclosure into one of the newly created VC domains
D. adding the additional BladeSystem enclosure to the current VC domain and upgrading to Virtual
Connect Enterprise Manager to manage more enclosures in the domain
Answer: C

HP기출문제   HP0-D09자료   HP0-D09   HP0-D09

NO.3 .Which elements are required for building a disaster recovery solution using HP Matrix OE, if HP
BladeSystem and HP EVA are already installed? (Select three.)
A. HP Insight Recovery Management
B. HP Application Recovery Manager
C. HP Business Copy EVA
D. HP Replication Solutions Manager EVA
E. HP Continuous Access EVA
Answer: A, D, E

HP dump   HP0-D09   HP0-D09최신덤프

NO.4 What can enabling "iLO event pass-thru" for event monitoring do?
A. increase workload for the iLO
B. enable iLO event collection by the OS of the server
C. duplicate the events generated for a server
D. enable OA to collect all iLO events in a single log
Answer: C

HP자료   HP0-D09덤프   HP0-D09   HP0-D09   HP0-D09

NO.5 Which tool is appropriate to use to forecast workload memory utilization for future provisioning?
A. HP Software Operations Orchestration
B. HP Matrix OE Capacity Planning
C. HP Insight Installation Advisor
D. HP System Management Home Page
Answer: B

HP   HP0-D09기출문제   HP0-D09   HP0-D09

NO.6 .What must be configured or changed in order to enable automated rehosting of virtual or physical
servers in the Converged Infrastructure environment.?
A. resource thresholds
B. storage capacity watermark
C. virtual swap memory setting
D. swap file storage location
Answer: A

HP인증   HP0-D09   HP0-D09덤프   HP0-D09인증

NO.7 .Your customer has a Converged Networking solution with an HP Virtual Connect and Physical
Instance enabled network card. The customer asks you to change the vMotion network speed. What
should you do to accomplish this?
A. Change the Required Network Speed within a local VMware Console
B. Change the Required Speed with VMware vSphere client
C. Change the Required Network Speed within Virtual Connect Manager
D. Change the Required Network Speed using Onboard Administrator GUI
Answer: C

HP시험문제   HP0-D09 pdf   HP0-D09   HP0-D09   HP0-D09

NO.8 .Which HP product delivers scale out, excellent performance, and a modular storage infrastructure?
A. HP EVA 6400
B. HP P410i
C. HP P2000 MSA
D. HP X9000
Answer: D

HP자료   HP0-D09   HP0-D09

NO.9 .How is Dynamic Power Capping achieved?
A. by disabling cores of a processor when a cap is reached
B. by raising the p-state of a processor when a cap is reached
C. by increasing the clock-cycle of a processor when a cap is reached
D. by lowering the p-state of a processor when a cap is reached
Answer: D

HP   HP0-D09시험문제   HP0-D09

NO.10 .In a BladeSystem Matrix environment, your logical servers are running low on usable storage capacity.
What can you do on the HP StorageWorks EVA4400 SAN array that was attached to the matrix enclosure?
(Select two.)
A. Add additional disk drives and disk enclosure if needed.
B. Change the disk failure protection level to double on the EVA4400.
C. Group new disk drives into the existing disk group.
D. Increase the storage raw capacity by joining two or more units of EVA4400 with the MPX200 router.
E. Change the vRAID level of the virtual disk from level 5 to level 1.
Answer: A, C

HP기출문제   HP0-D09   HP0-D09   HP0-D09덤프   HP0-D09

NO.11 .What does the Central Management Server (CMS) use to initiate and broker the migration process that
is required for Insight Control server migration capability?
A. FCoE
B. HPoncfg
C. PgAP
D. iSCSI
Answer: D

HP   HP0-D09   HP0-D09자격증   HP0-D09자료

NO.12 .An engineer is installing BL460 G7 Server Blades and Virtual Connect FlexFabric modules in a c7000
as part of an HP Converged Infrastructure solution. Which external ports can be used for Fibre Channel
connectivity?
A. the first 2 ports
B. the last 2 ports
C. the first 4 ports
D. the last 4 ports
Answer: C

HP   HP0-D09   HP0-D09인증

NO.13 You add new server blades to chassis managed by Matrix OE. What can you use to perform initial
deployment of VMware hypervisor hosts?
A. IO templates
B. IO servers
C. Insight Control deployment jobs
D. VMware vCenter templates
Answer: C

HP덤프   HP0-D09   HP0-D09인증   HP0-D09인증

NO.14 .You have completed installing a number of Virtual Connect (VC) based enclosure installations and
want to capture the most recent enclosure and VC information of all the enclosures. What is the quickest
way to do this?
A. Connect to the Onboard Administrator GUI and capture an enclosure inventory, then connect to Virtual
Connect Manager (VCM) via SSH and collect a 'show all' output.
B. Use the Virtual Connect Support Utility (VCSU) with the 'collect' option.
C. Use VCSU with the 'healthcheck' option.
D. Connect to the Onboard Administrator GUI and capture an enclosure inventory, then connect to Virtual
Connect Manager (VCM) via Telnet and collect a 'show all' output.
Answer: B

HP dump   HP0-D09자료   HP0-D09   HP0-D09

NO.15 .Which virtualization technique does not need to trap and translate all privileged layer instructions
between the guest OS and the actual server hardware?
A. binary translation
B. paravirtualization
C. hosted OS, application-layer abstraction
D. hardware-assisted virtualization
Answer: B

HP자료   HP0-D09   HP0-D09 dumps   HP0-D09덤프

NO.16 .Which functions does HP SIM provide? (Select three.)
A. continuous device monitoring
B. HP systems software update and tracking
C. server deployment
D. inventory reporting
E. migration of old servers to new ProLiant, maintaining operating system, configuration, and data
Answer: A, B, D

HP자료   HP0-D09   HP0-D09인증   HP0-D09 dump   HP0-D09 dumps

NO.17 .A feature of HP Insight Control Virtual Machine Management minimizes downtime by performing which
function?
A. relocating virtual machines before hardware failures occur
B. relocating virtual machines after hardware failures occur
C. relocating hosts before hardware failures occur
D. relocating hosts after hardware failures occur
Answer: A

HP dump   HP0-D09 pdf   HP0-D09시험문제   HP0-D09덤프   HP0-D09덤프

NO.18 .Click the Exhibit button.The customer sees that the Simulate button for the Room 44L Chiller 1 failure
rule is disabled in the Insight Control Data Center Power Control screen. What should you do to enable
the simulate function for the Room 44L Chiller 1 failure rule?
A. You should copy this rule to a new rule and click on the Simulate button for the new rule.
B. You should edit the rule and mark the Ready for Use button.
C. A rule with the status Not Ready for Use must be at the bottom of the rule list. Therefore, you must use
the down arrow button to move the rule to the bottom of the list.
D. The rule has been simulated before and failed the simulation. Therefore, you must edit the rule,
remove the errors, and then simulate the rule again.
Answer: B

HP   HP0-D09자료   HP0-D09   HP0-D09자료

NO.19 .When using Insight Control Performance Management and viewing a server availability report, what
does %Minor indicate?
A. percentage of time that a server is up and available for monitoring
B. percentage of overall performance that might be approaching a bottleneck condition
C. percentage of overall performance that is in a bottleneck condition
D. percentage of overall performance that is satisfactory with no impending or existing bottleneck
condition
Answer: B

HP자료   HP0-D09   HP0-D09기출문제   HP0-D09기출문제

NO.20 .Which HP Power Regulator setting allows reduced power consumption with little or no impact to
performance?
A. Static Low Power mode
B. Static High Performance mode
C. Dynamic Power Savings mode
D. OS Control mode
Answer: C

HP   HP0-D09최신덤프   HP0-D09 dumps

ITExamDump에는HP HP0-D09인증시험의 특별한 합습가이드가 있습니다. 여러분은 많은 시간과 돈을 들이지 않으셔도 많은 IT관련지식을 배우실수 있습니다.그리고 빠른 시일 내에 여러분의 IT지식을 인증 받으실 있습니다. ITExamDump인증자료들은 우리의 전문가들이 자기만의 지식과 몇 년간의 경험으로 준비중인 분들을 위하여 만들었습니다.


댓글 없음:

댓글 쓰기